CF-29 Paramter Error Please input, again - Touchscreen issue
CF-29 Paramter Error Please input, again - Touchscreen issue
CF-29 Parameter Error Please input, again - Touchscreen calibration error. I can't seem to calibrate this damn thing.. Any ideas?
Thanks
Thanks
~Rob - Vice President - Rugged Depot~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~
http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater
~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~
http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater
~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~
-
- Posts: 2
- Joined: Thu Sep 30, 2010 3:01 pm
- Location: Central Texas
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
I get same message, by touchscreen is bad. whats your do when you touch the screen normally?
my cursor jumps to far lower right corner. cleaned around the bezel with a business card and no trash. been lookin and asking around and everyone has said its a dead TS.
my cursor jumps to far lower right corner. cleaned around the bezel with a business card and no trash. been lookin and asking around and everyone has said its a dead TS.
-ReD
- toughasnails
- Toughbooktalk Moderator
- Posts: 2644
- Joined: Sat Mar 28, 2009 7:59 pm
- Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
Yes I would say it's dead. You could try to do a full OS install and then install the drivers in the proper order or pick up a restore disk set and try that....you can load the OS + the drivers in about 23 minutes.
Even if you can't get the touch to work you still have a good compurer. I have 2 with one touch not working. I use a BT mouse all the time anyways so not having the touch not working was no big deal to me
What is the full model number of the 29. Hope its not the SBC one...CF-29HTM50BM
If you are looking for the restore/recovery disk send me a PM and I will send you the info on who has them.
![:D :D](./images/smilies/biggrin.gif)
Even if you can't get the touch to work you still have a good compurer. I have 2 with one touch not working. I use a BT mouse all the time anyways so not having the touch not working was no big deal to me
What is the full model number of the 29. Hope its not the SBC one...CF-29HTM50BM
![:eek: :eek:](./images/smilies/eek.gif)
If you are looking for the restore/recovery disk send me a PM and I will send you the info on who has them.
![:spinny: :spinny:](./images/smilies/happy3.gif)
![:spinny: :spinny:](./images/smilies/happy3.gif)
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com
-
- Posts: 85
- Joined: Sun Oct 10, 2010 9:06 am
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
bad ts. sorry.
try a recovery disk, it helped out my mk1 (still not right, but it's now righter. or at least I feel like it's righter (yes, i know).
try a recovery disk, it helped out my mk1 (still not right, but it's now righter. or at least I feel like it's righter (yes, i know).
- toughasnails
- Toughbooktalk Moderator
- Posts: 2644
- Joined: Sat Mar 28, 2009 7:59 pm
- Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
I lost my touchscreen after I installed Windows 7 and after a month of screwing with it I put XP Pro back in but the touch never came back. I have since installed XP twice since then, once with the restore disk and once the long way.....XP then all the drivers in order and still nothing. I think I just might take the touch out of the MK1 or 4 and put it in the MK5 .
![:spinny: :spinny:](./images/smilies/happy3.gif)
![:spinny: :spinny:](./images/smilies/happy3.gif)
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
Best thing you can do Blair
The mk-1 touchscreen is the most reliable in my opinion
Alex
The mk-1 touchscreen is the most reliable in my opinion
Alex
![Image](http://multiply.com/mu/afterinfo/image/3:multiplyclipart/photos/94/1200x120/7/cat-playi.gif?et=zg1SwFxNJSWtcPPK8vQAVw&nmid=110465854)
- toughasnails
- Toughbooktalk Moderator
- Posts: 2644
- Joined: Sat Mar 28, 2009 7:59 pm
- Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
That's what I think I will do. My 26 year old daughter has this now but told her I was going to upgrade it to a MK4.
![:spinny: :spinny:](./images/smilies/happy3.gif)
![:spinny: :spinny:](./images/smilies/happy3.gif)
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com
-
- Posts: 85
- Joined: Sun Oct 10, 2010 9:06 am
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
Shoot.
I swapped the glass, the serial board, and now the lcd/touch cable, and it still operates randomly. Perfectly one second, and then parameter error and or to the right side of the screen...
I did have trash caught in the gasket when I transferred the glass, but thought I got it all.
I swapped the glass, the serial board, and now the lcd/touch cable, and it still operates randomly. Perfectly one second, and then parameter error and or to the right side of the screen...
I did have trash caught in the gasket when I transferred the glass, but thought I got it all.
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
What were you swapping , do you know for sure the new parts are good
Alex
Alex
![Image](http://multiply.com/mu/afterinfo/image/3:multiplyclipart/photos/94/1200x120/7/cat-playi.gif?et=zg1SwFxNJSWtcPPK8vQAVw&nmid=110465854)
-
- Posts: 85
- Joined: Sun Oct 10, 2010 9:06 am
Re: CF-29 Paramter Error Please input, again - Touchscreen issue
I had gotten an sbc lid from lxsys (I think) and he said it was known to work. Here's the dirty::
got an mk1, had an "oil stain" above the start button (on screen). touch worked great
then it started intermittent operation. tried the toothpick thing, didn't help
took my lid apart, poked around, re-assembled, and it worked! for a while
then the cursor would only go to the bottom
this problem would occur at random times, at random intervals, and go back to working
got the donor sbc lid
swapped the touch glass and serial board
worked great, for a while
same symptoms (except now cursor goes to the right instead of bottom). screen goes from randomly not working to perfect calibration
lived with it for 6 mo's or so
decided to swap the lcd/lcd cable, as it was the only common denominator (besides the mobo
)
worked great throughout the evening last night, till my wife used it
now the cursor only goes to the extreme right, but still tracks up and down
I'm waiting for it to randomly be calibrated
AND now I have no touch pad as i broke the lock on the receptacle! dernit.
The only thing that might be worth mentioning, is that before the touch would go to the extreme right, it would loose accuracy for a short time first. calibration would be near perfect on the right side of the screen, and the farther to the left side of the screen I would touch, the farther out of sync the pointer and my finger would be.
got an mk1, had an "oil stain" above the start button (on screen). touch worked great
then it started intermittent operation. tried the toothpick thing, didn't help
took my lid apart, poked around, re-assembled, and it worked! for a while
then the cursor would only go to the bottom
this problem would occur at random times, at random intervals, and go back to working
got the donor sbc lid
swapped the touch glass and serial board
worked great, for a while
same symptoms (except now cursor goes to the right instead of bottom). screen goes from randomly not working to perfect calibration
lived with it for 6 mo's or so
decided to swap the lcd/lcd cable, as it was the only common denominator (besides the mobo
![:eek: :eek:](./images/smilies/eek.gif)
worked great throughout the evening last night, till my wife used it
now the cursor only goes to the extreme right, but still tracks up and down
I'm waiting for it to randomly be calibrated
AND now I have no touch pad as i broke the lock on the receptacle! dernit.
The only thing that might be worth mentioning, is that before the touch would go to the extreme right, it would loose accuracy for a short time first. calibration would be near perfect on the right side of the screen, and the farther to the left side of the screen I would touch, the farther out of sync the pointer and my finger would be.