Hi,
i've recently bought a cf-19 with w7 32 bits installed and 8gb of ram added by the previous owner. So i formatted the drive and installed w7 64 bits.
i've then followed the step in the Installation_Instructions_19K_L_Win7_H-2009-0251.pdf
installing
OSINFFileDriver_v9.1.1.1019_19K_19L_W732_ss6937.exe
PanasonicCommonComponents_v2.00l11_19K_19L_W732_ss6946.exe
PanasonicMiscDriver_v1.2.1100.0_19K_19L_W732_ss6948.exe
SoundDriver_v6.10.1.6585_19K_19L_W732_ss6929.exe
all installed succesfully even if they are 32bits driver
when i tried installing
VideoDriver_v8.15.10.1872_19K_19L_W732_ss6939.exe
i told me the following:
This computer does not meet the minimum requirements for installing the software.
setup will exit.
so my question is where can i find the proper video driver for 64 bits and even all the 64bits driver.
model number is cf19kdrcxgc
video driver problem w7 64 bit cf-19 mk3
Re: video driver problem w7 64 bit cf-19 mk3
http://pc-dl.panasonic.co.jp/itn/support/win7info.html
video drivers I don't know. This is the basic document from the jp (Japan) Panasonic site.
video drivers I don't know. This is the basic document from the jp (Japan) Panasonic site.
Fair for you/ Fair for me.
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
Re: video driver problem w7 64 bit cf-19 mk3
ok well i've been able to use the mk4 driver to install in 64 bits the only mk3 driver i used was the touchscreen one which seem to work perfectly .
now i have a new problem the screen won'T dim is i use the hot key to change the brightness after about a second it'll revert to 100% even if the power mode doesn't set the screen to 100%.
does anybody know which driver has control over the brightness of the screen? right now i'll try the hotkey 32bit driver app and utility to see if that work as it seem to be what panasonic recommend.
now i have a new problem the screen won'T dim is i use the hot key to change the brightness after about a second it'll revert to 100% even if the power mode doesn't set the screen to 100%.
does anybody know which driver has control over the brightness of the screen? right now i'll try the hotkey 32bit driver app and utility to see if that work as it seem to be what panasonic recommend.
Re: video driver problem w7 64 bit cf-19 mk3
well I uninstalled the hotkey app and utility and everything work perfectly