CF-28 Blank screen on Boot

Post all questions and information about the CF-28 in here.
Message
Author
gazucha
Posts: 15
Joined: Sun May 26, 2013 7:09 pm

CF-28 Blank screen on Boot

#1 Post by gazucha »

Hi all,
have a T-Book CF-28P 800MHz which is refusing to play ball...

I bought it already loaded with XP Pro and with no FDD or optical drive and it had been working fine (if somewhat slow) until I had the brainstorming idea of nuking the 30Gb HD and sticking in a 160Gb upgrade.
Boy oh boy, was that ever a bum move? :pat:

..... more than 9 months later, after more hours and various Forum posts than can be remembered, (on one thread alone, we are on Post 94!) I have arrived here seeking some help and advice.

The problem is that upon Boot, it just stalls - after the Panasonic logo or Bios, - on a blank screen, with a flashing cursor in the upper left hand corner of the screen.
I have now tried removing the Ram and Battery, various different hard drives, as well as multiple installs of each of Win2000 (the original system but not orig discs), Win98, XP Pro and Home, Lubuntu 12.04, Linux Mint 11 LXDE, Peppermint 3 and others. I have run Boot-repair various times with no errors being shown, and just don't understand why I can run forever from a Live CD, with all the graphics and modem working fine, yet we cannot seem to pass the first step upon Boot. ????
I can only imagine that this is a hardware problem. perhaps created by the DVD Rom/caddy that I purchased in January in the false hope that it would resolve the install problems?


So......

Any ideas?

Thanks in advance.

User avatar
Springfield
Posts: 1512
Joined: Wed Oct 07, 2009 9:19 pm
Location: FL

Re: CF-28 Blank screen on Boot

#2 Post by Springfield »

Does it boot OK without the DVD? If so, the DVD probably is not set to Master as Panasonic requires. There is a simple mod to fix that in the CF-28 thread.
ToughBooks: CF-74 73 53 52 51 31 30 29 28 27 25 19 18 08 07 C1 C2 F9 H1 M32 M33 M34 R2 S10 T8 T5 T4 T2 U1 W2 Y2 VDW07 PDRC ...
GoBooks: VR-2, XR-1, IX-260+, IX-350

gazucha
Posts: 15
Joined: Sun May 26, 2013 7:09 pm

Re: CF-28 Blank screen on Boot

#3 Post by gazucha »

Hi,

no difference with or without the DVD Rom installed.

Cheers

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: CF-28 Blank screen on Boot

#4 Post by SHEEPMAN! »

And the manufacturer of the hard drive?

One brand of 160's had a bunch of bad drives. http://www.google.com/url?sa=t&rct=j&q= ... 3778,d.cGE

Good luck,

Jeff
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

gazucha
Posts: 15
Joined: Sun May 26, 2013 7:09 pm

Re: CF-28 Blank screen on Boot

#5 Post by gazucha »

Hi Jeff,

interesting to know..
The 160 is Samsung, although have also been having troubles with a Toshiba and Hitachi, although all of them work fine in my IBM T42.

Gonna downgrade to the Hitachi 40Gb and try again.

Thanks

gazucha
Posts: 15
Joined: Sun May 26, 2013 7:09 pm

Re: CF-28 Blank screen on Boot

#6 Post by gazucha »

Well, tried that, whilst installing Ubuntu 9.10 with a slight code variation...

http://ubuntuforums.org/showthread.php?t=1496711

and we have progress...

Not a lot, but it booted up to the words...

Grub loading.

That was 30 minutes ago.

Never did that before.

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: CF-28 Blank screen on Boot

#7 Post by SHEEPMAN! »

Did you use i915.modeset=1?

Have you read any of Glasen's stuff re:intel ? Some of the stuff I referenced in my NBR posts is no longer available. I just checked.

They are ignoring the existence of 9.10.

http://www.google.com/search?btnG=1&pws ... Fpanasonic

Replace TEST with your query for NBR.

I did a search for i915.modeset=1 and came up with this bum. http://forum.notebookreview.com/panason ... ost6422641

There is an earlier thread with Mint that may apply to 9.10.

Jeff
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: CF-28 Blank screen on Boot

#8 Post by Shawn »

The 160 could be "bad" or perhaps the bios has a size limit on the HDD.
Life will beat you into submission.

User avatar
ADOR
Posts: 1990
Joined: Tue Dec 21, 2010 12:51 pm
Location: Northeast Louisiana

Re: CF-28 Blank screen on Boot

#9 Post by ADOR »

Did you check to see if that DVD drive was set to master as Springfield asked earlier? Just trying to narrow it down.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5

gazucha
Posts: 15
Joined: Sun May 26, 2013 7:09 pm

Re: CF-28 Blank screen on Boot

#10 Post by gazucha »

Shawn wrote:The 160 could be "bad" or perhaps the bios has a size limit on the HDD.
Changed down to a 40Gb...
How could I tell if there is a Bios restriction?

Cheers.

Post Reply

Return to “CF-28 Talk (Discontinued Model)”