Com Port troubles HELP

Post all questions and information about the CF-18 in here.
Post Reply
Message
Author
Toughshmee
Posts: 1
Joined: Thu Dec 04, 2014 7:48 am

Com Port troubles HELP

#1 Post by Toughshmee »

Hi everyone I have just purchased a CF-18 Mk2 and I needed a com port ! but it didn't have one, so i purchased a power pcb with the com port on it and plugged it in but windows doesn't find it ??? also cannot find anything in the bios so I'm a bit confused....

Can anyone help me please

User avatar
safn1949
Posts: 544
Joined: Wed Jan 15, 2014 10:33 am

Re: Com Port troubles HELP

#2 Post by safn1949 »

Toughshmee wrote:Hi everyone I have just purchased a CF-18 Mk2 and I needed a com port ! but it didn't have one, so i purchased a power pcb with the com port on it and plugged it in but windows doesn't find it ??? also cannot find anything in the bios so I'm a bit confused....

Can anyone help me please
Some of the guys will be by to advise,I will tell you that you will be much better off getting a CF-19mk1 or 2 from ebay,mk1's are dirt cheap and will run circles around that 18,4gb of ram and a ssd is the way to go. :D
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: Com Port troubles HELP

#3 Post by Shawn »

Not sure what board you are talking about. Can you post a link or photo?
Life will beat you into submission.

User avatar
Springfield
Posts: 1512
Joined: Wed Oct 07, 2009 9:19 pm
Location: FL

Re: Com Port troubles HELP

#4 Post by Springfield »

Please give us the full model number, like CF-18xxxxxxx

Possible it's a digitizer model, believe those didn't have a com port.
ToughBooks: CF-74 73 53 52 51 31 30 29 28 27 25 19 18 08 07 C1 C2 F9 H1 M32 M33 M34 R2 S10 T8 T5 T4 T2 U1 W2 Y2 VDW07 PDRC ...
GoBooks: VR-2, XR-1, IX-260+, IX-350

User avatar
leoroberts343
Posts: 10
Joined: Sat May 14, 2022 10:04 pm

Re: Com Port troubles HELP

#5 Post by leoroberts343 »

Hi
I've done something similar, the PCB that has the DC Barrel jack and VGA port on my CF-18 noticeably had pads for a serial port, using spare parts from another dead cf-18 that had the serial port populated I installed it, both boards appear to be identical in footprint. and sadly no luck, I think this is because the Bios needs to be told that that com port is available and can be presented. I might be completely wrong in this, just a guess.

perhaps a nodded bios based of one of the models with the port included, in fact I have the old mobo, I could attempt to dump the bios if I extract the chip and use an Arduino? or some form of USB device?
CF-71 (MK?), CF-41 (MK3), CF-30, CF-28, CF-27, CF-25 (MK2), CF-18 (MK1), CF-07, CF-T8, CF-U1, CF-H1. SUN ultra enterprise E450 :pbjt:

User avatar
mklym
Posts: 907
Joined: Fri Feb 22, 2013 3:10 pm
Location: Edmonton, Alberta

Re: Com Port troubles HELP

#6 Post by mklym »

Are you sure that the daughter board is installed properly? Is the ribbon cable seated into the connector on the system board properly? Is the cable orientated properly and not upside down? If the board is installed correctly, the device should show in the BIOS. I never heard of a serial port needing the BIOS flashed to enable the port.
CF-29LTQ,CF-31SBM,CF-52youngGUN,

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.

User avatar
leoroberts343
Posts: 10
Joined: Sat May 14, 2022 10:04 pm

Re: Com Port troubles HELP

#7 Post by leoroberts343 »

yea I have checked the ribbon cable, sadly no change.

The original PCB is only missing the port itself which is a passive component, hence why I was thinking it would need to be pointed at somewhere in the software passably at a bios level. might just be a registry issue in windows that needs to be manually changed, such as enabling the port that is default disabled
CF-71 (MK?), CF-41 (MK3), CF-30, CF-28, CF-27, CF-25 (MK2), CF-18 (MK1), CF-07, CF-T8, CF-U1, CF-H1. SUN ultra enterprise E450 :pbjt:

User avatar
mklym
Posts: 907
Joined: Fri Feb 22, 2013 3:10 pm
Location: Edmonton, Alberta

Re: Com Port troubles HELP

#8 Post by mklym »

Thinking about this some more, if your unit had digital touch originally, then you will have to flask the BIOS with one from a analog touch. Phoenix does not have tools, like AMI, that allows you to d/l a BIOS image from a unit, change/mod the image and re-flash the Bios with the modded image.
CF-29LTQ,CF-31SBM,CF-52youngGUN,

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.

User avatar
ADOR
Posts: 1990
Joined: Tue Dec 21, 2010 12:51 pm
Location: Northeast Louisiana

Re: Com Port troubles HELP

#9 Post by ADOR »

If i remember right when they made a digitizer model they deleted the external serial port because that was used internally for the digitizer pen. And I think it can't be modded back in. I know we had a thread on it over at NBR but here is a archive link to see if you can find something on it. Will have to search the page with CTRL F. to search the page.

https://www.nbrchive.net/xfa/panasonic.1012/

Doing a quick search I did find this one thread on it, but I know there are more that go into more details.

https://www.nbrchive.net/xfa/panasonic. ... al%20port/
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5

User avatar
leoroberts343
Posts: 10
Joined: Sat May 14, 2022 10:04 pm

Re: Com Port troubles HELP

#10 Post by leoroberts343 »

Awesome, I will have a look into this, I think my unit used the digitiser but when I replaced the screen I installed the PCB type one.

TY
CF-71 (MK?), CF-41 (MK3), CF-30, CF-28, CF-27, CF-25 (MK2), CF-18 (MK1), CF-07, CF-T8, CF-U1, CF-H1. SUN ultra enterprise E450 :pbjt:

Post Reply

Return to “CF-18 Talk (Discontinued Model)”