Page 1 of 1

Motherboard Temp

Posted: Fri May 20, 2016 4:31 pm
by Rich
What should be the temp of the motherboard. I've got Piriform Speccy, which gives all kinds of specs, including motherboard temp, etc..

My Mk5 is running around 135 to 145 def F. My Mk2 runs around 90 deg F.

Anybody know a spec?

Re: Motherboard Temp

Posted: Fri May 20, 2016 6:57 pm
by Shawn
Did you check or change the thermal pads on the mk5?
If not, change the pads and test again.

Re: Motherboard Temp

Posted: Sat May 21, 2016 7:55 am
by Rich
Shawn, I just saw other posts about thermal pads. :pat: I will reread and get the stuff to replace them.

Thanks

Re: Motherboard Temp

Posted: Sat May 21, 2016 3:29 pm
by SHEEPMAN!
Just do the pads. IMHO Arctic silver is a crutch.

Get a chunk of 1.5 and one of .5.

http://www.frozencpu.com/cat/l2/g8/c487 ... _Tape.html

I have used a bunch of fujipoly. Or when you send it to me, I have some in stock.....but better if you do them both.

Pull the bottom and smoosh the pads today! (if they are not all crumbly)

Re: Motherboard Temp

Posted: Sat May 21, 2016 9:30 pm
by Rich
:salute: Ok, got some 1.5 & .5 fujipoly on order.

Thanks Jeff

Re: Motherboard Temp

Posted: Sun May 22, 2016 3:13 am
by Shawn
Please let us know how the Frozencpu transaction goes.
There are many reports of trouble with that company.

Just for info. Here is a link to a company started by ex frozencpu employees. It looks good, but I have not tried them yet.

https://modmymods.com/

Re: Motherboard Temp

Posted: Sun May 22, 2016 4:00 pm
by SHEEPMAN!
It's been two years since I dealt with them. Hope I didna lead you astray.

Thanks Shawn.

Re: Motherboard Temp

Posted: Thu May 26, 2016 12:19 pm
by Rich
Just got order from frozen pc, well it was delivered yesterday (Wednesday) to my box. So ordered Saturday delivered Wednesday, not to bad for standard shipping. I have no issues with them, good experience.

Now I just have to free up some time to make repairs, will update temperature changes.

Re: Motherboard Temp

Posted: Thu May 26, 2016 12:22 pm
by Shawn
Good to hear.