I must be running on 512 Mb ram.
This is from USB drive with xset m 8 1 and my menu tweak. Sound is fine with no changes. Listening to Willie and typing I need to add a stick of ram. CF-29MK5 1800 hours. OSDisk.com boughten from antiX. MX14.4 32 bit. (Stick is 32Gb of polished aluminum.)
demo@mx1:~
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-0.bpo.2-686-pae (
debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.14.15-2~bpo70+1 (2014-08-21)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6dffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f6e0000-0x000000001f6edfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001f6ee000-0x000000001f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Matsushita Electric Industrial Co.,Ltd. CF-29NTQGZBM/CF29-5, BIOS V5.00L14 08/03/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f6e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f1fffff]
[ 0.000000] [mem 0x1f000000-0x1f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1effffff]
[ 0.000000] [mem 0x1c000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f6dffff]
[ 0.000000] [mem 0x1f200000-0x1f5fffff] page 2M
[ 0.000000] [mem 0x1f600000-0x1f6dffff] page 4k
[ 0.000000] BRK [0x0174d000, 0x0174dfff] PGTABLE
[ 0.000000] BRK [0x0174e000, 0x0174ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f24e000-0x1f6dffff]
[ 0.000000] ACPI: RSDP 000f6840 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 1f6e604a 000040 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1f6ede78 000084 (v02 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: DSDT 1f6e68d0 0075A8 (v01 MATBIO CF29-5 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f6eefc0 000040
[ 0.000000] ACPI: APIC 1f6edefc 000062 (v01 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: BOOT 1f6edfd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 1f6edf9c 00003C (v01 MATBIO CF29-5 06040000 MEI 00000001)
[ 0.000000] ACPI: SSDT 1f6e6487 0002B9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1f6e62a9 0001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 1f6e608a 00021F (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f6e0000
[ 0.000000] low ram: 0 - 1f6e0000
[ 0.000000] BRK [0x01750000, 0x01750fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f6dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f6dffff]
[ 0.000000] On node 0 totalpages: 128638
[ 0.000000] free_area_init_node: node 0, pgdat c160a500, node_mem_map dee5e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 974 pages used for memmap
[ 0.000000] Normal zone: 124640 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dee3e000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127632
[ 0.000000] Kernel command line: quiet antiX=LX
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 497748K/514552K available (4477K kernel code, 404K rwdata, 1368K rodata, 552K init, 584K bss, 16804K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xdfee0000 - 0xff9fe000 ( 507 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
[ 0.000000] .init : 0xc161d000 - 0xc16a7000 ( 552 kB)
[ 0.000000] .data : 0xc145f808 - 0xc161c100 (1778 kB)
[ 0.000000] .text : 0xc1000000 - 0xc145f808 (4478 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=de806000 soft=de808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.146 MHz processor
[ 0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.29 BogoMIPS (lpj=6384584)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.004046] ACPI: Core revision 20131218
[ 0.010238] ACPI: All ACPI Tables successfully acquired
[ 0.012049] Security Framework initialized
[ 0.012075] AppArmor: AppArmor disabled by boot time parameter
[ 0.012078] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012111] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.012114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.012468] Initializing cgroup subsys memory
[ 0.012480] Initializing cgroup subsys devices
[ 0.012484] Initializing cgroup subsys freezer
[ 0.012489] Initializing cgroup subsys net_cls
[ 0.012493] Initializing cgroup subsys blkio
[ 0.012496] Initializing cgroup subsys perf_event
[ 0.012533] Disabled fast string operations
[ 0.012544] mce: CPU supports 5 MCE banks
[ 0.012556] CPU0: Thermal monitoring enabled (TM2)
[ 0.012580] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.012580] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.012580] tlb_flushall_shift: 6
[ 0.022689] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062793] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[ 0.064000] Performance Events: p6 PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 32
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 00000000ffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 0000000000000003
[ 0.064000] x86: Booted up 1 node, 1 CPUs
[ 0.064000] smpboot: Total of 1 processors activated (3192.29 BogoMIPS)
[ 0.064000] devtmpfs: initialized
[ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064000] PM: Registering ACPI NVS region [mem 0x1f6ee000-0x1f6fffff] (73728 bytes)
[ 0.064000] pinctrl core: initialized pinctrl subsystem
[ 0.064000] NET: Registered protocol family 16
[ 0.064000] cpuidle: using governor ladder
[ 0.064000] cpuidle: using governor menu
[ 0.064000] ACPI: bus type PCI registered
[ 0.064000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.064000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064000] PCI: Using MMCONFIG for extended config space
[ 0.064000] PCI: Using configuration type 1 for base access
[ 0.065173] bio: create slab <bio-0> at 0
[ 0.065307] ACPI: Added _OSI(Module Device)
[ 0.065310] ACPI: Added _OSI(Processor Device)
[ 0.065313] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.065316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180057] ACPI: Interpreter enabled
[ 0.180095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.180102] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.180123] ACPI: (supports S0 S3 S4 S5)
[ 0.180126] ACPI: Using IOAPIC for interrupt routing
[ 0.180173] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.185870] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.304369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304380] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304388] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.305212] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.305216] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.305221] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.305226] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.305229] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.305233] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.305237] acpi PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.305241] acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.305245] PCI: root bus 00: using default resources
[ 0.305501] PCI host bridge to bus 0000:00
[ 0.305506] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.305510] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.305514] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.305528] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.305679] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.305693] pci 0000:00:02.0: reg 0x10: [mem 0xb0080000-0xb00fffff]
[ 0.305702] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.305710] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.305718] pci 0000:00:02.0: reg 0x1c: [mem 0xb0000000-0xb003ffff]
[ 0.305855] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.305866] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x0007ffff]
[ 0.306034] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.306124] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.306203] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.306288] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.306335] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.306468] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.306515] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.306645] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.306692] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.306833] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.306856] pci 0000:00:1d.7: reg 0x10: [mem 0xb0040000-0xb00403ff]
[ 0.306949] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.307079] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.307247] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.307264] pci 0000:00:1e.2: reg 0x10: [io 0x1c00-0x1cff]
[ 0.307275] pci 0000:00:1e.2: reg 0x14: [io 0x18c0-0x18ff]
[ 0.307286] pci 0000:00:1e.2: reg 0x18: [mem 0xb0040800-0xb00409ff]
[ 0.307297] pci 0000:00:1e.2: reg 0x1c: [mem 0xb0040400-0xb00404ff]
[ 0.307346] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.307470] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[ 0.307487] pci 0000:00:1e.3: reg 0x10: [io 0x2400-0x24ff]
[ 0.307498] pci 0000:00:1e.3: reg 0x14: [io 0x2000-0x207f]
[ 0.307562] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.307673] pci 0000:00:1e.3: System wakeup disabled by ACPI
[ 0.307757] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.307843] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.307854] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.307861] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.307867] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.307986] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.308005] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.308016] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.308027] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.308037] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.308048] pci 0000:00:1f.2: reg 0x20: [io 0x1890-0x189f]
[ 0.308090] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.308215] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.308273] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.308529] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
[ 0.308557] pci 0000:02:00.0: reg 0x10: [mem 0xb4000000-0xb4003fff 64bit]
[ 0.308572] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff]
[ 0.308621] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.308700] pci 0000:02:00.0: supports D1 D2
[ 0.308703] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308801] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.308814] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.308820] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.308826] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.308834] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.308927] pci 0000:06:01.0: [1180:0476] type 02 class 0x060700
[ 0.308946] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.308950] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.308966] pci 0000:06:01.0: reg 0x10: [mem 0xb8000000-0xb8000fff]
[ 0.308998] pci 0000:06:01.0: supports D1 D2
[ 0.309002] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309104] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500
[ 0.309125] pci 0000:06:01.1: reg 0x10: [mem 0xb8002000-0xb80020ff]
[ 0.309211] pci 0000:06:01.1: supports D1 D2
[ 0.309214] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309320] pci 0000:06:02.0: [8086:4223] type 00 class 0x028000
[ 0.309342] pci 0000:06:02.0: reg 0x10: [mem 0xb8003000-0xb8003fff]
[ 0.309432] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 0.309558] pci 0000:00:1e.0: PCI bridge to [bus 06-08] (subtractive decode)
[ 0.309566] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.309574] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.309580] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.309651] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-08] (conflicts with (null) [bus 06-08])
[ 0.309659] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 0.309679] pci_bus 0000:00: on NUMA node 0
[ 0.312533] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.312617] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 0.312698] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 0.312780] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.312861] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 0.312942] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.313022] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 0.313105] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[ 0.341099] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.341210] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.341362] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.341368] vgaarb: loaded
[ 0.341370] vgaarb: bridge control possible 0000:00:02.0
[ 0.341439] PCI: Using ACPI for IRQ routing
[ 0.349909] PCI: pci_cache_line_size set to 64 bytes
[ 0.349964] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.349968] e820: reserve RAM buffer [mem 0x1f6e0000-0x1fffffff]
[ 0.350329] hpet clockevent registered
[ 0.350334] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.350340] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.350346] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.352051] Switched to clocksource hpet
[ 0.355473] pnp: PnP ACPI init
[ 0.355504] ACPI: bus type PNP registered
[ 0.362083] system 00:00: [mem 0x000cf200-0x000cf7ff] has been reserved
[ 0.362088] system 00:00: [mem 0x000d0800-0x000d3fff] has been reserved
[ 0.362094] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.363644] system 00:01: [io 0x0900-0x091f] has been reserved
[ 0.363649] system 00:01: [io 0x092c-0x097f] has been reserved
[ 0.363654] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.363658] system 00:01: [io 0x0920-0x092b] has been reserved
[ 0.363663] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.363668] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373179] system 00:02: [io 0x02e0-0x02e7] has been reserved
[ 0.373184] system 00:02: [io 0x0330-0x0337] has been reserved
[ 0.373189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373210] pnp 00:03: [dma 4]
[ 0.373256] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.373311] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.373470] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.373539] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.373703] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.373708] system 00:07: [io 0x1000-0x107f] could not be reserved
[ 0.373713] system 00:07: [io 0x1180-0x11bf] has been reserved
[ 0.373718] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.373722] system 00:07: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.373727] system 00:07: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.373733] system 00:07: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.373737] system 00:07: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.373742] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.373746] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.373751] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373867] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373932] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.374836] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.376729] pnp 00:0b: Plug and Play ACPI device, IDs FJC6000 PNP0f13 (active)
[ 0.389513] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.423481] pnp 00:0d: [irq 0 disabled]
[ 0.423486] pnp 00:0d: [dma 0 disabled]
[ 0.429698] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.434097] pnp: PnP ACPI: found 14 devices
[ 0.434100] ACPI: bus type PNP unregistered
[ 0.434106] PnPBIOS: Disabled by ACPI PNP
[ 0.471846] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471851] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471858] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06-08] add_size 1000
[ 0.471864] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471870] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-08] add_size 4000000
[ 0.471879] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.471886] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471890] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.471901] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.471906] pci 0000:00:02.1: BAR 0: assigned [mem 0x24000000-0x2407ffff]
[ 0.471915] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.471921] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[ 0.471926] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.471931] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.471938] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.471944] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.471955] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.471959] pci 0000:06:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.471964] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471967] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.471972] pci 0000:06:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.471979] pci 0000:06:01.0: BAR 16: assigned [mem 0xbc000000-0xbfffffff]
[ 0.471983] pci 0000:06:01.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.471987] pci 0000:06:01.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.471992] pci 0000:06:01.0: CardBus bridge to [bus 07]
[ 0.471995] pci 0000:06:01.0: bridge window [io 0x4000-0x40ff]
[ 0.472002] pci 0000:06:01.0: bridge window [io 0x4400-0x44ff]
[ 0.472012] pci 0000:06:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.472019] pci 0000:06:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.472025] pci 0000:00:1e.0: PCI bridge to [bus 06-08]
[ 0.472029] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.472036] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.472042] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.472051] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.472055] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.472059] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.472062] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
[ 0.472066] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.472070] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.472074] pci_bus 0000:06: resource 1 [mem 0xb8000000-0xb80fffff]
[ 0.472078] pci_bus 0000:06: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.472081] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.472085] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.472089] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
[ 0.472092] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
[ 0.472096] pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.472100] pci_bus 0000:07: resource 3 [mem 0xbc000000-0xbfffffff]
[ 0.472150] NET: Registered protocol family 2
[ 0.472398] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.472419] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.472449] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.472477] TCP: reno registered
[ 0.472480] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.472491] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.472574] NET: Registered protocol family 1
[ 0.472599] pci 0000:00:02.0: Boot video device
[ 0.473355] PCI: CLS 32 bytes, default 64
[ 0.473435] Unpacking initramfs...
[ 0.640891] Freeing initrd memory: 4680K (df24e000 - df6e0000)
[ 0.641054] Simple Boot Flag at 0x41 set to 0x1
[ 0.641222] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.641354] microcode: Microcode Update Driver: v2.00 <
tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.641822] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.641940] audit: initializing netlink subsys (disabled)
[ 0.641978] audit: type=2000 audit(1459183786.640:1): initialized
[ 0.662486] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.662590] VFS: Disk quotas dquot_6.5.2
[ 0.662622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.662729] msgmni has been set to 981
[ 0.663080] alg: No test for stdrng (krng)
[ 0.663107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.663148] io scheduler noop registered
[ 0.663151] io scheduler deadline registered
[ 0.663160] io scheduler cfq registered (default)
[ 0.663458] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.663606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.663640] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.663719] intel_idle: does not run on family 6 model 13
[ 0.663793] GHES: HEST is not enabled!
[ 0.663818] isapnp: Scanning for PnP cards...
[ 1.016966] isapnp: No Plug & Play device found
[ 1.017071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.037668] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.038505] Linux agpgart interface v0.103
[ 1.038631] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.038653] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.039609] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.039794] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.040096] i8042: PNP: PS/2 Controller [PNP0303:K101,FJC6000:MOU2] at 0x60,0x64 irq 1,12
[ 1.041900] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.041910] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.042126] mousedev: PS/2 mouse device common for all mice
[ 1.042225] rtc_cmos 00:08: RTC can wake from S4
[ 1.042391] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.042421] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.042620] TCP: cubic registered
[ 1.042640] NET: Registered protocol family 10
[ 1.043003] mip6: Mobile IPv6
[ 1.043007] NET: Registered protocol family 17
[ 1.043013] mpls_gso: MPLS GSO support
[ 1.043183] Using IPI No-Shortcut mode
[ 1.043333] registered taskstats version 1
[ 1.043764] rtc_cmos 00:08: setting system clock to 2016-03-28 16:49:47 UTC (1459183787)
[ 1.043853] PM: Hibernation image not present or could not be loaded.
[ 1.044206] Freeing unused kernel memory: 552K (c161d000 - c16a7000)
[ 1.044257] Write protecting the kernel text: 4480k
[ 1.044309] Write protecting the kernel read-only data: 1372k
[ 1.044311] NX-protecting the kernel data: 3712k
[ 1.080086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.342262] ACPI: bus type USB registered
[ 1.343642] usbcore: registered new interface driver usbfs
[ 1.344610] usbcore: registered new interface driver hub
[ 1.346131] usbcore: registered new device driver usb
[ 1.348511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.430367] Floppy drive(s): fd0 is 1.44M
[ 1.640030] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 2.640086] Switched to clocksource tsc
[ 4.448037] floppy0: no floppy controllers found
[ 4.448052] work still pending
[ 4.494552] SCSI subsystem initialized
[ 4.500900] libata version 3.00 loaded.
[ 4.502444] ata_piix 0000:00:1f.2: version 2.13
[ 4.502591] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.513044] scsi0 : ata_piix
[ 4.515031] scsi1 : ata_piix
[ 4.515466] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
[ 4.515471] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
[ 4.680437] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
[ 4.696357] ata2.00: configured for UDMA/33
[ 9.552011] ata1: link is slow to respond, please be patient (ready=0)
[ 14.536011] ata1: device not ready (errno=-16), forcing hardreset
[ 19.732011] ata1: link is slow to respond, please be patient (ready=0)
[ 24.548011] ata1: SRST failed (errno=-16)
[ 29.744011] ata1: link is slow to respond, please be patient (ready=0)
[ 34.560011] ata1: SRST failed (errno=-16)
[ 39.756011] ata1: link is slow to respond, please be patient (ready=0)
[ 69.604011] ata1: SRST failed (errno=-16)
[ 74.632011] ata1: SRST failed (errno=-16)
[ 74.642701] ata1: reset failed, giving up
[ 74.644231] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 74.658020] uhci_hcd: USB Universal Host Controller Interface driver
[ 74.658245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 74.658259] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 74.658271] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 74.658322] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 74.658407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.658411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.658415] usb usb1: Product: UHCI Host Controller
[ 74.658418] usb usb1: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.658422] usb usb1: SerialNumber: 0000:00:1d.0
[ 74.659659] hub 1-0:1.0: USB hub found
[ 74.659677] hub 1-0:1.0: 2 ports detected
[ 74.659974] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 74.659984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 74.659993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 74.660077] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 74.660266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.660270] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.660274] usb usb2: Product: UHCI Host Controller
[ 74.660277] usb usb2: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.660281] usb usb2: SerialNumber: 0000:00:1d.1
[ 74.661422] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 74.661428] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 74.663751] hub 2-0:1.0: USB hub found
[ 74.663772] hub 2-0:1.0: 2 ports detected
[ 74.664120] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 74.664130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 74.664143] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 74.664188] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 74.664285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 74.664289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.664292] usb usb3: Product: UHCI Host Controller
[ 74.664296] usb usb3: Manufacturer: Linux 3.14-0.bpo.2-686-pae uhci_hcd
[ 74.664299] usb usb3: SerialNumber: 0000:00:1d.2
[ 74.668554] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 74.669391] hub 3-0:1.0: USB hub found
[ 74.669412] hub 3-0:1.0: 2 ports detected
[ 74.701880] ehci-pci: EHCI PCI platform driver
[ 74.710530] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 74.710548] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 74.710570] ehci-pci 0000:00:1d.7: debug port 1
[ 74.714497] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 74.714540] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0040000
[ 74.724022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 74.724167] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 74.724171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 74.724175] usb usb4: Product: EHCI Host Controller
[ 74.724178] usb usb4: Manufacturer: Linux 3.14-0.bpo.2-686-pae ehci_hcd
[ 74.724182] usb usb4: SerialNumber: 0000:00:1d.7
[ 74.724783] hub 4-0:1.0: USB hub found
[ 74.724798] hub 4-0:1.0: 6 ports detected
[ 74.748152] hub 1-0:1.0: USB hub found
[ 74.748168] hub 1-0:1.0: 2 ports detected
[ 74.772144] hub 2-0:1.0: USB hub found
[ 74.772157] hub 2-0:1.0: 2 ports detected
[ 74.796146] hub 3-0:1.0: USB hub found
[ 74.796162] hub 3-0:1.0: 2 ports detected
[ 75.036030] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 75.338991] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[ 75.338997] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 75.339003] usb 4-1: Product: DataTraveler 3.0
[ 75.339006] usb 4-1: Manufacturer: Kingston
[ 75.339009] usb 4-1: SerialNumber: 50E549C6930FEF7059119E86
[ 75.344751] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 75.345347] scsi2 : usb-storage 4-1:1.0
[ 75.346388] usbcore: registered new interface driver usb-storage
[ 76.433428] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 77.433315] sd 2:0:0:0: [sda] 61457664 512-byte logical blocks: (31.4 GB/29.3 GiB)
[ 77.433927] sd 2:0:0:0: [sda] Write Protect is off
[ 77.433932] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 77.434553] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.434557] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.438052] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.438056] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.463457] sda: sda1
[ 77.466304] sd 2:0:0:0: [sda] No Caching mode page found
[ 77.466309] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 77.466313] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 77.886972] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 77.894431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 77.939731] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 77.946786] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 77.972256] loop: module loaded
[ 77.977314] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 78.025845] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 78.049832] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 78.055871] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 78.057366] aufs 3.14-20140616
[ 78.057594] aufs test_add:293:mount[1253]: uid/gid/perm /live/linux 1000/1000/0755, 0/0/01777
[ 79.243654] random: nonblocking pool is initialized
[ 79.449683] systemd-udevd[1473]: starting version 204
[ 79.960955] tsc: Marking TSC unstable due to TSC halts in idle
[ 79.960976] ACPI: acpi_idle registered with cpuidle
[ 79.965540] Switched to clocksource hpet
[ 80.000888] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 80.039772] ACPI: Lid Switch [LID]
[ 80.039923] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 80.039931] ACPI: Power Button [PWRB]
[ 80.040083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 80.040087] ACPI: Power Button [PWRF]
[ 80.091087] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 80.091689] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 80.093484] ACPI: AC Adapter [AC] (on-line)
[ 80.229515] parport_pc 00:0d: reported by Plug and Play ACPI
[ 80.229583] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 80.298279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 80.335766] [drm] Initialized drm 1.1.0 20060810
[ 80.398869] Floppy drive(s): fd0 is 1.44M
[ 80.426135] ACPI: Battery Slot [BATA] (battery present)
[ 80.426466] input: Panasonic Laptop Support as /devices/virtual/input/input6
[ 80.453644] ACPI: Battery Slot [BATB] (battery absent)
[ 80.456451] thermal LNXTHERM:00: registered as thermal_zone0
[ 80.456456] ACPI: Thermal Zone [TZC] (48 C)
[ 80.476377] lib80211: common routines for IEEE802.11 drivers
[ 80.476383] lib80211_crypt: registered algorithm 'NULL'
[ 80.534749] intel_rng: FWH not detected
[ 80.777610] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 80.777710] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 80.778266] sky2: driver version 1.30
[ 80.778503] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 80.778563] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[ 80.778967] sky2 0000:02:00.0 eth0: addr 00:0b:97:b8:dc:98
[ 80.934045] cfg80211: Calling CRDA to update world regulatory domain
[ 81.045831] libipw: 802.11 data/management/control stack, git-1.1.13
[ 81.045838] libipw: Copyright (C) 2004-2005 Intel Corporation <
jketreno@linux.intel.com>
[ 81.047864] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 81.047871] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 81.052957] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 81.138908] sdhci: Secure Digital Host Controller Interface driver
[ 81.138914] sdhci: Copyright(c) Pierre Ossman
[ 81.158317] ipw2200 0000:06:02.0: firmware: direct-loading firmware ipw2200-bss.fw
[ 81.324964] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 81.327124] yenta_cardbus 0000:06:01.0: CardBus bridge found [10f7:8338]
[ 81.448416] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 81.464699] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0cb8, PCI irq 20
[ 81.464705] yenta_cardbus 0000:06:01.0: Socket status: 30000006
[ 81.464715] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 81.464720] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
[ 81.465725] excluding 0x4000-0x40ff 0x4400-0x44ff
[ 81.473308] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
[ 81.473314] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff:
[ 81.473318] excluding 0xb8000000-0xb800ffff
[ 81.473334] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 81.473338] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff:
[ 81.473356] excluding 0x20000000-0x23ffffff
[ 81.476755] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 11)
[ 81.477901] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 81.478907] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 81.479017] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 81.647450] intel8x0_measure_ac97_clock: measured 66754 usecs (3214 samples)
[ 81.647460] intel8x0: clocking to 48000
[ 81.652866] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 81.653527] [drm] Memory usable by graphics device = 256M
[ 81.654951] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 81.654956] [drm] Driver supports precise vblank timestamp query.
[ 81.655093] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 81.679220] [drm] initialized overlay support
[ 81.826530] input: PS/2 Touchpad as /devices/platform/i8042/serio1/input/input9
[ 81.852214] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input7
[ 81.941888] fbcon: inteldrmfb (fb0) is primary device
[ 82.724317] Console: switching to colour frame buffer device 128x48
[ 82.730026] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 82.730029] i915 0000:00:02.0: registered panic notifier
[ 82.732029] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 83.197802] ppdev: user-space parallel port driver
[ 83.434073] floppy0: no floppy controllers found
[ 83.434093] work still pending
[ 83.472590] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 83.473603] excluding 0x170-0x177 0x1f0-0x1f7 0x2e0-0x2e7 0x330-0x337 0x370-0x37f
[ 83.474217] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 83.474645] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 83.474947] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 83.475448] clean.
[ 83.475470] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 83.476252] clean.
[ 83.476284] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 83.476291] excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xe0000-0xfffff
[ 83.476327] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 83.476348] clean.
[ 83.476368] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 83.476387] clean.
[ 83.476407] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 83.476972] clean.
[ 83.489760] iTCO_vendor_support: vendor-support=0
[ 83.491577] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 83.491636] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 83.492667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 83.587435] wl: module license 'MIXED/Proprietary' taints kernel.
[ 83.587442] Disabling lock debugging due to kernel taint
[ 88.012652] device-mapper: uevent: version 1.0.3
[ 88.012785] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-devel@redhat.com
[ 94.772595] sky2 0000:02:00.0 eth0: enabling interface
[ 94.776107] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 110.988434] fuse init (API version 7.22)
[ 292.400273] lib80211_crypt: registered algorithm 'TKIP'
[ 786.687068] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Try dmesg | grep input. Look for PC Speaker