So I initially used Ubuntu 10.10 which ran fast, but it was sort of a pain because due to being unsupported everything was a manual process and I'm still getting acclimated to all this. It did however still exhibit this restart issue even in 10.10. Then I tried Ubuntu 14.04 which really ran slow. I then switched to Mint 17 which is a LTS release thru 2019. This runs very quick on this CF-18. The only thing that could make it better is if the front buttons worked and this restart thing is resolved otherwise I really like it.
As far as the dmesg.0 the following is the contents:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-24-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f6f0000-0x000000005f6f9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f6fa000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Matsushita Electric Industrial Co.,Ltd. CF-18FDHZXVM/CF18-3, BIOS V3.00L13 03/17/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f6f0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1527M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 1527MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 1528MB, range: 8MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34b4a000-0x3659cfff]
[ 0.000000] ACPI: RSDP 000f7280 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 5f6f3de6 000030 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 5f6f9f54 000084 (v02 MATBIO CF18-3 06040000 MAT 00000001)
[ 0.000000] ACPI: DSDT 5f6f418d 005DC7 (v01 MATBIO CF18-3 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 5f6fafc0 000040
[ 0.000000] ACPI: BOOT 5f6f9fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 5f6f3e16 0001A9 (v01 MATBIO CF18-3 06040000 MSFT 0100000E)
[ 0.000000] 634MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x5f6effff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f6effff]
[ 0.000000] On node 0 totalpages: 390798
[ 0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f700e020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1270 pages used for memmap
[ 0.000000] HighMem zone: 162546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xff7fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6ff7000 s36096 r0 d21248 u57344
[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389014
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=2f322ba7-4f72-4428-9f8b-cba1817ac6f1 ro reboot=pci quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3127160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0005f6f0)
[ 0.000000] Memory: 1508176K/1563192K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 55016K reserved, 650184K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19ae000 - 0xc1a88000 ( 872 kB)
[ 0.000000] .data : 0xc165b0b2 - 0xc19ad4c0 (3401 kB)
[ 0.000000] .text : 0xc1000000 - 0xc165b0b2 (6508 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1097.336 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.67 BogoMIPS (lpj=4389344)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004085] Security Framework initialized
[ 0.004129] AppArmor: AppArmor initialized
[ 0.004133] Yama: becoming mindful.
[ 0.008039] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008045] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008660] Initializing cgroup subsys memory
[ 0.008679] Initializing cgroup subsys devices
[ 0.008685] Initializing cgroup subsys freezer
[ 0.008692] Initializing cgroup subsys blkio
[ 0.008698] Initializing cgroup subsys perf_event
[ 0.008705] Initializing cgroup subsys hugetlb
[ 0.008762] Disabled fast string operations
[ 0.008777] mce: CPU supports 5 MCE banks
[ 0.008817] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.008817] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.008817] tlb_flushall_shift: 6
[ 0.029024] Freeing SMP alternatives memory: 32K (c1a88000 - c1a90000)
[ 0.032092] ACPI: Core revision 20131115
[ 0.039144] ACPI: All ACPI Tables successfully acquired
[ 0.040015] ftrace: allocating 27695 entries in 55 pages
[ 0.060205] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.060214] smpboot: SMP motherboard not detected
[ 0.060218] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.060221] smpboot: SMP disabled
[ 0.067787] Performance Events:
[ 0.067795] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.067798] no hardware sampling interrupt available.
[ 0.067803] p6 PMU driver.
[ 0.067808] ... version: 0
[ 0.067811] ... bit width: 32
[ 0.067814] ... generic registers: 2
[ 0.067817] ... value mask: 00000000ffffffff
[ 0.067821] ... max period: 000000007fffffff
[ 0.067824] ... fixed-purpose events: 0
[ 0.067827] ... event mask: 0000000000000003
[ 0.071891] x86: Booted up 1 node, 1 CPUs
[ 0.071898] smpboot: Total of 1 processors activated (2194.67 BogoMIPS)
[ 0.072039] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.072255] devtmpfs: initialized
[ 0.072760] EVM: security.selinux
[ 0.072764] EVM: security.SMACK64
[ 0.072767] EVM: security.ima
[ 0.072769] EVM: security.capability
[ 0.072996] PM: Registering ACPI NVS region [mem 0x5f6fa000-0x5f6fffff] (24576 bytes)
[ 0.075814] pinctrl core: initialized pinctrl subsystem
[ 0.075982] regulator-dummy: no parameters
[ 0.076063] RTC time: 1:47:14, date: 07/16/14
[ 0.076156] NET: Registered protocol family 16
[ 0.076558] EISA bus registered
[ 0.076563] cpuidle: using governor ladder
[ 0.076566] cpuidle: using governor menu
[ 0.076775] ACPI: bus type PCI registered
[ 0.076782] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.077165] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.077172] PCI: PCI BIOS revision 2.10 entry at 0xfd982, last bus=3
[ 0.077175] PCI: Using configuration type 1 for base access
[ 0.080060] bio: create slab <bio-0> at 0
[ 0.080394] ACPI: Added _OSI(Module Device)
[ 0.080399] ACPI: Added _OSI(Processor Device)
[ 0.080403] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080407] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096627] ACPI: Interpreter enabled
[ 0.096679] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.096689] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.096719] ACPI: (supports S0 S3 S4 S5)
[ 0.096723] ACPI: Using PIC for interrupt routing
[ 0.096767] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.097048] ACPI: No dock devices found.
[ 0.165105] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165118] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.165131] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.166402] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.166409] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.166415] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.166421] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.166426] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.166432] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.166438] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.166444] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfec1ffff] (ignored)
[ 0.166449] PCI: root bus 00: using default resources
[ 0.166456] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.166752] PCI host bridge to bus 0000:00
[ 0.166760] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.166766] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.166772] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.166791] pci 0000:00:00.0: [8086:3580] type 00 class 0x060000
[ 0.166976] pci 0000:00:00.1: [8086:3584] type 00 class 0x088000
[ 0.167149] pci 0000:00:00.3: [8086:3585] type 00 class 0x088000
[ 0.168153] pci 0000:00:02.0: [8086:3582] type 00 class 0x030000
[ 0.168171] pci 0000:00:02.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.168182] pci 0000:00:02.0: reg 0x14: [mem 0xe0000000-0xe007ffff]
[ 0.168193] pci 0000:00:02.0: reg 0x18: [io 0x1800-0x1807]
[ 0.168238] pci 0000:00:02.0: supports D1
[ 0.168378] pci 0000:00:02.1: [8086:3582] type 00 class 0x038000
[ 0.168394] pci 0000:00:02.1: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.168405] pci 0000:00:02.1: reg 0x14: [mem 0xe0080000-0xe00fffff]
[ 0.168455] pci 0000:00:02.1: supports D1
[ 0.168622] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[ 0.168675] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.168827] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[ 0.168880] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.169036] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[ 0.169089] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.169253] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[ 0.169280] pci 0000:00:1d.7: reg 0x10: [mem 0xe0100000-0xe01003ff]
[ 0.169386] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.169541] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.169706] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[ 0.169787] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.169796] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.169933] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[ 0.169952] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.169966] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.169980] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.169994] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.170008] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.170022] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[ 0.170177] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[ 0.170230] pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
[ 0.170387] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[ 0.170407] pci 0000:00:1f.5: reg 0x10: [io 0x1c00-0x1cff]
[ 0.170420] pci 0000:00:1f.5: reg 0x14: [io 0x18c0-0x18ff]
[ 0.170434] pci 0000:00:1f.5: reg 0x18: [mem 0xe0100c00-0xe0100dff]
[ 0.170447] pci 0000:00:1f.5: reg 0x1c: [mem 0xe0100800-0xe01008ff]
[ 0.170502] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.170650] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[ 0.170671] pci 0000:00:1f.6: reg 0x10: [io 0x2400-0x24ff]
[ 0.170684] pci 0000:00:1f.6: reg 0x14: [io 0x2000-0x207f]
[ 0.170754] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.170919] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.171114] pci 0000:01:00.0: [1180:0476] type 02 class 0x060700
[ 0.171133] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.171138] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.171155] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.171187] pci 0000:01:00.0: supports D1 D2
[ 0.171192] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171318] pci 0000:01:02.0: [10ec:8139] type 00 class 0x020000
[ 0.171340] pci 0000:01:02.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.171354] pci 0000:01:02.0: reg 0x14: [mem 0xe0201000-0xe02010ff]
[ 0.171426] pci 0000:01:02.0: supports D1 D2
[ 0.171431] pci 0000:01:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.171473] pci 0000:01:02.0: System wakeup disabled by ACPI
[ 0.171553] pci 0000:01:03.0: [8086:4223] type 00 class 0x028000
[ 0.171576] pci 0000:01:03.0: reg 0x10: [mem 0xe0200000-0xe0200fff]
[ 0.171658] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
[ 0.171793] pci 0000:00:1e.0: PCI bridge to [bus 01-03] (subtractive decode)
[ 0.171802] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.171810] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.171818] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.171823] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.171896] pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01-03] (conflicts with (null) [bus 01-03])
[ 0.171906] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.171922] pci_bus 0000:00: on NUMA node 0
[ 0.174396] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.174559] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 0.174720] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 0.174879] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.175038] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 0.175198] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.175359] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 0.175521] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[ 0.196418] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.196418] Found 1 acpi root devices
[ 0.196549] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.196793] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196803] vgaarb: loaded
[ 0.196806] vgaarb: bridge control possible 0000:00:02.0
[ 0.197352] SCSI subsystem initialized
[ 0.197438] libata version 3.00 loaded.
[ 0.197497] ACPI: bus type USB registered
[ 0.197550] usbcore: registered new interface driver usbfs
[ 0.197573] usbcore: registered new interface driver hub
[ 0.197621] usbcore: registered new device driver usb
[ 0.197858] PCI: Using ACPI for IRQ routing
[ 0.197894] PCI: pci_cache_line_size set to 64 bytes
[ 0.197958] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.197963] e820: reserve RAM buffer [mem 0x5f6f0000-0x5fffffff]
[ 0.198185] NetLabel: Initializing
[ 0.198188] NetLabel: domain hash size = 128
[ 0.198191] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.198221] NetLabel: unlabeled traffic allowed by default
[ 0.200212] Switched to clocksource pit
[ 0.217368] AppArmor: AppArmor Filesystem Enabled
[ 0.217459] pnp: PnP ACPI init
[ 0.217516] ACPI: bus type PNP registered
[ 0.219493] system 00:00: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.219502] system 00:00: [mem 0x000cd800-0x000cffff] could not be reserved
[ 0.219512] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220401] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.220409] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.220416] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.220422] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.220428] system 00:01: [io 0x0362] has been reserved
[ 0.220435] system 00:01: [io 0x0366] has been reserved
[ 0.220441] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.220448] system 00:01: [io 0x0580-0x0587] has been reserved
[ 0.220455] system 00:01: [mem 0xff800000-0xffffffff] could not be reserved
[ 0.220463] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220491] pnp 00:02: [dma 4]
[ 0.220538] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.220615] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.220688] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.220752] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.221247] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.222561] pnp 00:07: Plug and Play ACPI device, IDs FJC6001 PNP0f13 (active)
[ 0.244777] pnp 00:08: Plug and Play ACPI device, IDs WACf004 PNP0501 (active)
[ 0.259049] pnp: PnP ACPI: found 9 devices
[ 0.259054] ACPI: bus type PNP unregistered
[ 0.259063] PnPBIOS: Disabled by ACPI PNP
[ 0.297452] Switched to clocksource acpi_pm
[ 0.297493] pci 0000:01:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.297504] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 01-03] add_size 4000000
[ 0.297516] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.297526] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.297540] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.297548] pci 0000:00:1f.1: BAR 5: assigned [mem 0x64000000-0x640003ff]
[ 0.297566] pci 0000:01:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.297572] pci 0000:01:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.297578] pci 0000:01:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.297584] pci 0000:01:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.297593] pci 0000:01:00.0: BAR 0: assigned [mem 0x68000000-0x68000fff]
[ 0.297602] pci 0000:01:00.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.297610] pci 0000:01:00.0: BAR 16: assigned [mem 0x6c000000-0x6fffffff]
[ 0.297616] pci 0000:01:00.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.297622] pci 0000:01:00.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.297629] pci 0000:01:00.0: CardBus bridge to [bus 02]
[ 0.297634] pci 0000:01:00.0: bridge window [io 0x3400-0x34ff]
[ 0.297642] pci 0000:01:00.0: bridge window [io 0x3800-0x38ff]
[ 0.297650] pci 0000:01:00.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.297657] pci 0000:01:00.0: bridge window [mem 0x6c000000-0x6fffffff]
[ 0.297665] pci 0000:00:1e.0: PCI bridge to [bus 01-03]
[ 0.297672] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.297681] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.297689] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.297701] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.297706] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.297712] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.297718] pci_bus 0000:01: resource 1 [mem 0xe0200000-0xe02fffff]
[ 0.297724] pci_bus 0000:01: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.297729] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.297734] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.297740] pci_bus 0000:02: resource 0 [io 0x3400-0x34ff]
[ 0.297745] pci_bus 0000:02: resource 1 [io 0x3800-0x38ff]
[ 0.297751] pci_bus 0000:02: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.297757] pci_bus 0000:02: resource 3 [mem 0x6c000000-0x6fffffff]
[ 0.297839] NET: Registered protocol family 2
[ 0.298263] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.298313] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.298401] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.298457] TCP: reno registered
[ 0.298464] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.298487] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.298625] NET: Registered protocol family 1
[ 0.298664] pci 0000:00:02.0: Boot video device
[ 0.298934] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.298940] PCI: setting IRQ 9 as level-triggered
[ 0.299194] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.299442] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 0.299691] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 0.299848] PCI: CLS 32 bytes, default 64
[ 0.299965] Trying to unpack rootfs image as initramfs...
[ 1.563071] Freeing initrd memory: 26956K (f4b4a000 - f659d000)
[ 1.563374] Simple Boot Flag at 0x41 set to 0x1
[ 1.563707] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 1.563895] microcode: Microcode Update Driver: v2.00 <
tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.563901] Scanning for low memory corruption every 60 seconds
[ 1.564559] Initialise system trusted keyring
[ 1.564678] audit: initializing netlink socket (disabled)
[ 1.564707] type=2000 audit(1405475235.561:1): initialized
[ 1.617490] bounce pool size: 64 pages
[ 1.617514] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.621212] VFS: Disk quotas dquot_6.5.2
[ 1.621330] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.622495] fuse init (API version 7.22)
[ 1.622684] msgmni has been set to 1728
[ 1.622827] Key type big_key registered
[ 1.623358] Key type asymmetric registered
[ 1.623363] Asymmetric key parser 'x509' registered
[ 1.623449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.623506] io scheduler noop registered
[ 1.623510] io scheduler deadline registered (default)
[ 1.623580] io scheduler cfq registered
[ 1.623865] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.623903] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.624050] efifb: probing for efifb
[ 1.624058] efifb: cannot reserve video memory at 0xa0000
[ 1.624065] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
[ 1.624070] efifb: mode is 640x480x1, linelength=80, pages=1
[ 1.624072] efifb: scrolling: redraw
[ 1.624077] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.627755] Console: switching to colour frame buffer device 80x30
[ 1.631302] fb0: EFI VGA frame buffer device
[ 1.631345] intel_idle: does not run on family 6 model 13
[ 1.631362] ipmi message handler version 39.2
[ 1.634068] ACPI: AC Adapter [AC] (on-line)
[ 1.634438] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.634450] ACPI: Power Button [PWRB]
[ 1.634626] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.646891] ACPI: Lid Switch [LID]
[ 1.646995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.647002] ACPI: Power Button [PWRF]
[ 1.647155] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.647169] ACPI: acpi_idle registered with cpuidle
[ 1.659070] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.659075] ACPI: Thermal Zone [TZC] (53 C)
[ 1.659161] GHES: HEST is not enabled!
[ 1.659339] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.679870] 00:08: ttyS4 at I/O 0x148 (irq = 4, base_baud = 115200) is a 16550A
[ 1.680220] isapnp: Scanning for PnP cards...
[ 1.734690] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 1.735170] Linux agpgart interface v0.103
[ 1.735281] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 1.735348] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 1.736803] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.737042] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.742805] brd: module loaded
[ 1.746663] loop: module loaded
[ 1.747142] ata_piix 0000:00:1f.1: version 2.13
[ 1.747167] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.793104] scsi0 : ata_piix
[ 1.793241] scsi1 : ata_piix
[ 1.793369] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.793374] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.794193] libphy: Fixed MDIO Bus: probed
[ 1.794457] tun: Universal TUN/TAP device driver, 1.6
[ 1.794461] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.795111] PPP generic driver version 2.4.2
[ 1.795268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.795280] ehci-pci: EHCI PCI platform driver
[ 1.795398] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.795412] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.795433] ehci-pci 0000:00:1d.7: debug port 1
[ 1.799362] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.799417] ehci-pci 0000:00:1d.7: irq 9, io mem 0xe0100000
[ 1.799689] ata2: port disabled--ignoring
[ 1.843460] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.843650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.843656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.843662] usb usb1: Product: EHCI Host Controller
[ 1.843667] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.843672] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.843897] hub 1-0:1.0: USB hub found
[ 1.843917] hub 1-0:1.0: 6 ports detected
[ 1.844288] ehci-platform: EHCI generic platform driver
[ 1.844309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.844312] ohci-pci: OHCI PCI platform driver
[ 1.844336] ohci-platform: OHCI generic platform driver
[ 1.844354] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.844443] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.844454] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.844492] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001820
[ 1.844599] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.844605] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.844610] usb usb2: Product: UHCI Host Controller
[ 1.844615] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.844620] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.844830] hub 2-0:1.0: USB hub found
[ 1.844847] hub 2-0:1.0: 2 ports detected
[ 1.845087] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.845099] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.845126] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001840
[ 1.845216] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.845222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.845228] usb usb3: Product: UHCI Host Controller
[ 1.845233] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.845238] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.845442] hub 3-0:1.0: USB hub found
[ 1.845458] hub 3-0:1.0: 2 ports detected
[ 1.845703] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.845715] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.845743] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001860
[ 1.845832] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.845839] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.845844] usb usb4: Product: UHCI Host Controller
[ 1.845849] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.845854] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.846064] hub 4-0:1.0: USB hub found
[ 1.846080] hub 4-0:1.0: 2 ports detected
[ 1.846402] i8042: PNP: PS/2 Controller [PNP0303:K101,FJC6001:MOU1] at 0x60,0x64 irq 1,12
[ 1.848546] i8042: Detected active multiplexing controller, rev 1.1
[ 1.893614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.893625] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.893691] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.893748] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.893798] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.894014] mousedev: PS/2 mouse device common for all mice
[ 1.894326] rtc_cmos 00:04: RTC can wake from S4
[ 1.894481] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.894504] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram
[ 1.894663] device-mapper: uevent: version 1.0.3
[ 1.938373] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-devel@redhat.com
[ 1.938417] platform eisa.0: Probing EISA bus 0
[ 1.938430] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.938437] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.938443] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.938480] platform eisa.0: EISA: Detected 0 cards
[ 1.938492] cpufreq-nforce2: No nForce2 chipset.
[ 1.938499] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.938832] TCP: cubic registered
[ 1.939086] NET: Registered protocol family 10
[ 1.939537] NET: Registered protocol family 17
[ 1.939557] Key type dns_resolver registered
[ 1.939887] Using IPI No-Shortcut mode
[ 1.940079] Loading compiled-in X.509 certificates
[ 2.036815] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[ 2.036855] registered taskstats version 1
[ 2.041312] Key type trusted registered
[ 2.088582] isapnp: No Plug & Play device found
[ 2.088825] Key type encrypted registered
[ 2.091623] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[ 2.091631] ata1.00: 156301488 sectors, multi 16: LBA48
[ 2.093644] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.093651] IMA: No TPM chip found, activating TPM-bypass!
[ 2.093988] regulator-dummy: disabling
[ 2.094062] Magic number: 6:546:761
[ 2.094215] rtc_cmos 00:04: setting system clock to 2014-07-16 01:47:16 UTC (1405475236)
[ 2.094531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.094535] EDD information not available.
[ 2.094625] PM: Hibernation image not present or could not be loaded.
[ 2.104549] ata1.00: configured for UDMA/100
[ 2.105366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.290767] ACPI: Battery Slot [BATA] (battery present)
[ 2.291037] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5
[ 2.291372] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.291489] sd 0:0:0:0: [sda] Write Protect is off
[ 2.291496] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.291548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.292084] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.338987] sda: sda1 sda2 < sda5 >
[ 2.339545] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.340217] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[ 2.340306] Write protecting the kernel text: 6512k
[ 2.340465] Write protecting the kernel read-only data: 2756k
[ 2.340468] NX-protecting the kernel data: 5776k
[ 2.368321] systemd-udevd[96]: starting version 204
[ 2.431495] ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no)
[ 2.439581] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
[ 2.547306] [drm] Initialized drm 1.1.0 20060810
[ 2.585338] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.585392] 8139cp 0000:01:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.673948] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.674769] 8139too 0000:01:02.0 eth0: RealTek RTL8139 at 0x00013000, 00:0b:97:2e:74:89, IRQ 9
[ 2.995614] [drm] Memory usable by graphics device = 128M
[ 2.995626] checking generic (a0000 10000) vs hw (e8000000 8000000)
[ 2.995630] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 2.995663] Console: switching to colour dummy device 80x25
[ 3.000539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.000547] [drm] Driver supports precise vblank timestamp query.
[ 3.000661] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.060045] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[ 3.085133] [drm] initialized overlay support
[ 3.188524] fbcon: inteldrmfb (fb0) is primary device
[ 3.391497] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.952187] Console: switching to colour frame buffer device 128x48
[ 3.959590] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.959595] i915 0000:00:02.0: registered panic notifier
[ 3.959614] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.180131] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input12
[ 4.476679] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.866170] random: nonblocking pool is initialized
[ 20.110601] Adding 513020k swap on /dev/sda5. Priority:-1 extents:1 across:513020k FS
[ 20.237568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.529854] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.537305] systemd-udevd[329]: starting version 204
[ 20.818470] lp: driver loaded but no devices found
[ 20.874977] ppdev: user-space parallel port driver
[ 21.274993] input: Panasonic Laptop Support as /devices/virtual/input/input13
[ 21.418992] intel_rng: FWH not detected
[ 21.526374] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.808672] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.SID0 1 (20131115/utaddress-251)
[ 21.808690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.808695] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.SID0 1 (20131115/utaddress-251)
[ 21.808703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.808707] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 22.553583] Bluetooth: Core ver 2.17
[ 22.554604] NET: Registered protocol family 31
[ 22.554610] Bluetooth: HCI device and connection manager initialized
[ 22.554627] Bluetooth: HCI socket layer initialized
[ 22.554633] Bluetooth: L2CAP socket layer initialized
[ 22.554651] Bluetooth: SCO socket layer initialized
[ 22.684604] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.684613] Bluetooth: BNEP filters: protocol multicast
[ 22.684635] Bluetooth: BNEP socket layer initialized
[ 22.695015] cfg80211: Calling CRDA to update world regulatory domain
[ 22.699920] Bluetooth: RFCOMM TTY layer initialized
[ 22.699966] Bluetooth: RFCOMM socket layer initialized
[ 22.699979] Bluetooth: RFCOMM ver 1.11
[ 22.828696] lib80211: common routines for IEEE802.11 drivers
[ 22.828709] lib80211_crypt: registered algorithm 'NULL'
[ 22.979375] yenta_cardbus 0000:01:00.0: CardBus bridge found [10f7:8338]
[ 23.106603] yenta_cardbus 0000:01:00.0: ISA IRQ mask 0x0cb8, PCI irq 9
[ 23.106616] yenta_cardbus 0000:01:00.0: Socket status: 30000006
[ 23.106630] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 23.106637] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[ 23.165152] libipw: 802.11 data/management/control stack, git-1.1.13
[ 23.165163] libipw: Copyright (C) 2004-2005 Intel Corporation <
jketreno@linux.intel.com>
[ 23.254785] init: cups main process (492) killed by HUP signal
[ 23.254812] init: cups main process ended, respawning
[ 23.107923] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
[ 23.347917] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
[ 23.347929] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe02fffff:
[ 23.347934] excluding 0xe0200000-0xe020ffff
[ 23.347957] yenta_cardbus 0000:01:00.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 23.347963] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
[ 23.347988] excluding 0x60000000-0x63ffffff
[ 23.446871] device-mapper: multipath: version 1.6.0 loaded
[ 23.572549] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 23.572558] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 23.572840] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 24.686115] init: failsafe main process (572) killed by TERM signal
[ 24.731279] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 25.065257] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 25.066196] excluding 0x148-0x14f 0x170-0x177 0x1f0-0x1f7 0x360-0x367 0x370-0x377
[ 25.066981] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 25.067358] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 25.067721] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 25.084828] clean.
[ 25.084915] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 25.085559] clean.
[ 25.085599] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 25.085610] excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 25.085658] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 25.085688] clean.
[ 25.085717] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 25.085740] excluding 0x60000000-0x60ffffff
[ 25.085772] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 25.086435] clean.
[ 25.153504] cfg80211: World regulatory domain updated:
[ 25.153516] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.153521] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.153526] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.153530] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.153534] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.153539] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.128051] intel8x0_measure_ac97_clock: measured 55279 usecs (2663 samples)
[ 26.128061] intel8x0: clocking to 48000
[ 27.162206] init: samba-ad-dc main process (732) terminated with status 1
[ 27.772707] 8139too 0000:01:02.0 eth0: link down
[ 27.779531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.783139] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready