~Toughbooktalk~ Rob - 630-300-8877

The largest Toughbook discussion site on the net!
It is currently Sat Aug 17, 2019 5:18 pm

All times are UTC-06:00




Post new topic  Reply to topic  [ 98 posts ]  Go to page Previous 15 6 7 8 9 10 Next
Author Message
PostPosted: Sun Jul 02, 2017 10:27 pm 
Offline
User avatar

Joined: Thu Oct 14, 2010 1:13 pm
Posts: 2251
Location: TDR-HQ California
Here is a MK6 dual touch.....FYI....

Calibration from menu selected "fingertouch" screen also. This was my second run using terminal xinput_calibrator.


Attachments:
ts191.png
ts191.png [ 450.68 KiB | Viewed 1182 times ]

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
Top
   
PostPosted: Mon Jul 03, 2017 10:50 am 
Offline
User avatar

Joined: Sat Jun 07, 2014 7:39 am
Posts: 681
Location: Canada
On my system the touch and digitizer screen uses Wacom drivers instead of libinput, so I kludged a xsetwacom command on startup to calibrate it. I just haven't figured out the long-press right-click yet.

_________________
CF-19 MK2 TOUCHSCREEN || CF-19 MK2 DIGITIZER || CF-30 MK3 "Jeff Edition" || CF-19 MK4


Top
   
PostPosted: Sun Apr 07, 2019 2:42 pm 
Offline
User avatar

Joined: Fri Feb 22, 2013 3:10 pm
Posts: 858
Location: Edmonton, Alberta
I guess I have been out of the game too long. I have a CF-31SBM61DM that I am trying to calibrate.

I have a caddy and ssd that has Mint 19.1 XFCE on it. I set it up in a friends CF-30Mk3 . When I installed the caddy and ssd into the CF-31Mk3 it booted okay and all seemed well until I went to calibrate the TS.

When the touchscreen setting in the BIOS is set to "Auto" or "Tablet mode" xinput_calibrator cannot find a calibratable device. When set to "Touchscreen mode" there is a calibratable device. Going through the calibration process executes okay but the setting don't stick. The calibration is out like it was before doing the calibration.

I see that there is a couple newer BIOS upgrade files available for this unit on the global panny site. Problem is they have to be run in windoze. The BIOS version on the unit is V3.00L13, while the newer ones are V3.00L14 and then V3.00L16.

I think I am going to download a new Mint 19.1 iso and do a clean install. If that does not work then load w7, flash the BIOS then load Mint 19.1.

Any thoughts/ideas or suggestions?

_________________
CF-29LTQ,CF-52GUN,CF-31SBM,CF-D1D

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.


Top
   
PostPosted: Sun Apr 07, 2019 3:09 pm 
Offline
User avatar

Joined: Thu Oct 14, 2010 1:13 pm
Posts: 2251
Location: TDR-HQ California
dmesg | grep input -i #-i for disregarding caps
lsusb

I'm heating my MK3 up...just a second....switching over

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/


Top
   
PostPosted: Sun Apr 07, 2019 3:15 pm 
Offline
User avatar

Joined: Fri Feb 22, 2013 3:10 pm
Posts: 858
Location: Edmonton, Alberta
morgan@morgan-CF-30Mint19:~$ dmesg | grep input -i
[ 1.440295] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.440351] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.440381] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.714121] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.082664] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 2.596514] input: Fujitsu Component USB Touch Panel as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0430:0532.0001/input/input11
[ 2.596647] hid-generic 0003:0430:0532.0001: input,hidraw0: USB HID v1.11 Device [Fujitsu Component USB Touch Panel] on usb-0000:00:1d.0-1.6/input0
[ 2.644202] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input9
[ 4.531723] input: Panasonic Laptop Support as /devices/virtual/input/input14
[ 4.805970] input: USB2.0 Camera: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
[ 4.951783] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.013772] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.013850] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.013913] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.013980] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 18.496279] input: ThinkPad Bluetooth Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/bluetooth/hci0/hci0:35/0005:17EF:6002.0002/input/input20
[ 18.500415] hid-generic 0005:17EF:6002.0002: input,hidraw1: BLUETOOTH HID v2.45 Mouse [ThinkPad Bluetooth Laser Mouse] on c8:f7:33:d8:9f:27
morgan@morgan-CF-30Mint19:~$

morgan@morgan-CF-30Mint19:~$ lsusb
Bus 002 Device 004: ID 8087:07da Intel Corp.
Bus 002 Device 003: ID 0430:0532 Sun Microsystems, Inc.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera
Bus 001 Device 005: ID 1199:68a2 Sierra Wireless, Inc.
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
morgan@morgan-CF-30Mint19:~$

_________________
CF-29LTQ,CF-52GUN,CF-31SBM,CF-D1D

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.


Top
   
PostPosted: Sun Apr 07, 2019 3:18 pm 
Offline
User avatar

Joined: Thu Oct 14, 2010 1:13 pm
Posts: 2251
Location: TDR-HQ California
I didn't have calibrator installed. :)
I'm gonna shut down and check bios settings. Meanwhile:

So after sudo apt-get install xinput-calibrator

Doing dynamic recalibration:
Setting calibration data: 151, 3932, 256, 4007
--> Making the calibration permanent <--
copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)
Section "InputClass"
Identifier "calibration"
MatchProduct "Fujitsu Component USB Touch Panel"
Option "Calibration" "151 3932 256 4007"
Option "SwapAxes" "0"
EndSection

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/


Top
   
PostPosted: Sun Apr 07, 2019 3:22 pm 
Offline
User avatar

Joined: Thu Oct 14, 2010 1:13 pm
Posts: 2251
Location: TDR-HQ California
Meanwhile with as many devices installed as shown in your reports above, I'd unplug any peripheral usb devices and re-boot twice...stand-by first while I check settings.

Oh, are you using calibration from the menu or terminal?

Be right back.

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/


Top
   
PostPosted: Sun Apr 07, 2019 3:26 pm 
Offline
User avatar

Joined: Fri Feb 22, 2013 3:10 pm
Posts: 858
Location: Edmonton, Alberta
I had to go into the BIOS and change the TS setting to touchscreen mode.

morgan@morgan-CF-30Mint19:~$ xinput_calibrator
Calibrating standard Xorg driver "Fujitsu Component USB Touch Panel"
current calibration values: min_x=0, max_x=65535 and min_y=0, max_y=65535
If these values are estimated wrong, either supply it manually with the --precalib option, or run the 'get_precalib.sh' script to automatically get it (through HAL).
--> Making the calibration permanent <--
copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)
Section "InputClass"
Identifier "calibration"
MatchProduct "Fujitsu Component USB Touch Panel"
Option "MinX" "2528"
Option "MaxX" "62687"
Option "MinY" "4814"
Option "MaxY" "64945"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
morgan@morgan-CF-30Mint19:~$

I have nothing USB plugged in. The Thinkpad mouse is bluetooth. I will turn it off and reboot twice.

_________________
CF-29LTQ,CF-52GUN,CF-31SBM,CF-D1D

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.


Top
   
PostPosted: Sun Apr 07, 2019 3:32 pm 
Offline
User avatar

Joined: Fri Feb 22, 2013 3:10 pm
Posts: 858
Location: Edmonton, Alberta
After two reboots:

morgan@morgan-CF-30Mint19:~$ xinput_calibrator
Calibrating standard Xorg driver "Fujitsu Component USB Touch Panel"
current calibration values: min_x=0, max_x=65535 and min_y=0, max_y=65535
If these values are estimated wrong, either supply it manually with the --precalib option, or run the 'get_precalib.sh' script to automatically get it (through HAL).
--> Making the calibration permanent <--
copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)
Section "InputClass"
Identifier "calibration"
MatchProduct "Fujitsu Component USB Touch Panel"
Option "MinX" "2469"
Option "MaxX" "62586"
Option "MinY" "4757"
Option "MaxY" "65002"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
morgan@morgan-CF-30Mint19:~$

I am running the calibrator from a terminal.

_________________
CF-29LTQ,CF-52GUN,CF-31SBM,CF-D1D

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.


Top
   
PostPosted: Sun Apr 07, 2019 3:35 pm 
Offline
User avatar

Joined: Thu Oct 14, 2010 1:13 pm
Posts: 2251
Location: TDR-HQ California
I was thinking usb multiplexer confusion.

Mine is set auto tablet hence the different numbers.

Where did you get xinput-calibrator.....checking


Attachments:
Screenshot from 2019-04-07 14-34-21.png
Screenshot from 2019-04-07 14-34-21.png [ 109.16 KiB | Viewed 341 times ]

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 98 posts ]  Go to page Previous 15 6 7 8 9 10 Next

All times are UTC-06:00


Who is online

Users browsing this forum: Bing [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited