~Toughbooktalk~ Rob - 630-300-8877

hi guyz
fz m1 serial port installation. the cable NOT GOING in the brown slot. any ideas ?
see pictures
bought the fz m1 serial port from heartland
brand new kit with all the stuff required for the serial port to be installed.
practical issue.
can u plz let us know if any one out there can help out
kind regards
matt

_________________
[size=200]kindly email
MYDEARCOMPUTERS@HOTMAIL.COM
OR CALL CELL 630 290 1727
address: 720 S main street
Lombard IL 60148 USA.
REGARDS
MATT[/size]

You have to lift it up gently the brown lock on the connector around 2mm but be very careful on doing that coz it can easily be damaged if you have a heavy hand, lol.. them slide in the cable ribbon and then push down that brown thingy thing to lock it firmly.

Sorry! Is your problem has you have a wider cable ribbon?

teo

thank you thank you for the info.
gonna try your method and see if that solves the problem
kind regards
matt

_________________
[size=200]kindly email
MYDEARCOMPUTERS@HOTMAIL.COM
OR CALL CELL 630 290 1727
address: 720 S main street
Lombard IL 60148 USA.
REGARDS
MATT[/size]

Is that one copper trace broken or bent? #5 from the top edge. It can be carefully trimmed with GOOD scissors. IOW shorten the cable by 1/16"?

_________________
Fair for you/ Fair for me.
I chose to NOT be organized.
-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/