changes between mark of cf-19

Post all questions and information about the CF-19 in here.
Message
Author
User avatar
teo
Posts: 731
Joined: Wed Mar 18, 2009 8:31 pm
Location: B.C.

Re: changes between mark of cf-19

#11 Post by teo »

I gave up! on doing this Led backlight until I can find or design my own Led backlight inverter. Instead I installed the digitizer Lcd bezel and replace the glass panel from Cf-18 Ts glass panel. There is bit difference between the digitizer and touchscreen bezel of CF-19 MK1 and MK2 the front area of the digitizer panel is wider than the Ts model. As you can see on the picture there a bit black trim on all side or section of the screen but it perfect as like new. I have to sacrifice one of my cf-18 screen to do this but the end result is flawless and perfect. Who can now tell that my unit is a touchscreen model. Even the motherboard (MK2) is also digitizer too but it is now a native touchscreen model. Sorry to present you the lid cover as it is like from war and I applied some jb weld on it to hold it in place,Lol. Thats the toughbook still kicking the ass. Now! I am looking for an Lcd lid cover for cf-19Mk1 or MK2.
Attachments
After the make over( charcoal Lid style)
After the make over( charcoal Lid style)
2010 new yr 1184.jpg (169.9 KiB) Viewed 5336 times
Upgraded MK1 to Mk2
Upgraded MK1 to Mk2
2010 new yr 1164.jpg (249.09 KiB) Viewed 5386 times
Upgraded MK1 to Mk2 unit
Upgraded MK1 to Mk2 unit
2010 new yr 1163.jpg (276.8 KiB) Viewed 5388 times
Last edited by teo on Sat Nov 27, 2010 8:32 pm, edited 1 time in total.

User avatar
Rob
Toughbooktalk Founder
Posts: 3575
Joined: Mon Mar 16, 2009 8:23 pm
Contact:

Re: changes between mark of cf-19

#12 Post by Rob »

Teo, nice chop shop!!! :D
~Rob - Vice President - Rugged Depot~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~

http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater


~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~

User avatar
teo
Posts: 731
Joined: Wed Mar 18, 2009 8:31 pm
Location: B.C.

Re: changes between mark of cf-19

#13 Post by teo »

Rob!.. meat and toughbook met there once in a while, Lol. Anyway, Alex! did you install the San Nav sirfIII module on your cf-19. I've got a chance yesterday and goes well as plan. It exactly fit on the top side of the audio board with the connector of the module flush out on the board. Here is a few pictures that I have taken. Sorry! i only used my phone camera.

Rob! heres the CRAP again you will then see it on Ebay. :pbjt: :pbjt:

teo
Attachments
GPS signal on CF-19MK1 SAN NAV module SirfIII
GPS signal on CF-19MK1 SAN NAV module SirfIII
2010 new yr 672.jpg (218.07 KiB) Viewed 5356 times
internal setup
internal setup
2010 new yr 671.jpg (261.66 KiB) Viewed 5357 times
internal gps setup
internal gps setup
2010 new yr 67777.jpg (244.03 KiB) Viewed 5352 times

Post Reply

Return to “CF-19 Talk (Discontinued Model)”