Windows 10 on CF-19 MK6

Post all questions and information about the CF-19 in here.
Post Reply
Message
Author
Shackwrrr
Posts: 6
Joined: Fri Nov 04, 2016 10:31 am

Windows 10 on CF-19 MK6

#1 Post by Shackwrrr »

Got my cf-19 yesterday, cheapest mk6 I could find on ebay and it's not too bad. Has 5360 hours on it and looks great. Couple pressure spots and a bright pixel but that doesn't bother me for the price. Its a CF-191dyc51m, has GPS and everything works.

I couldn't find much information on installing windows 10 on the mk-6 so I figured I would give it a shot. I used the free upgrade (on screen keyboard is assistive technologies right?)

So far everything works great, had to make one small change to the settings, I selected to disable the touch when the pen is being used as this would cause the pen to be jumpy. Also uninstalled the panasonic bluetooth software as the windows bluetooth support is pretty good. All the other Panasonic software seems to work as designed

I figured out a cool trick with the GPS. Since our GPS chip is com based it is only in use when a program accesses the com port. windows 10 added integration of GPS systems like a phone where the GPS is there for any program to use. I found a piece of software that pulls the GPS data from the com port and translates that to windows 10 sensor data. Now the GPS works like a phone where you can enable and disable it by turning location on and off. This allows you to use windows (bing) maps with turn by turn navigation. Also google maps on chrome works, as does any other website that can pull location. http://www.turboirc.com/gps7/

Verified today that the verizon card works perfect. Windows can connect and disconnect with no extra software.

As others have also noticed, screen brightness is a little different. I can get as low as %3 but as soon as I drop below that the backlight turns off. This is fine for me and I have no issues. Also the light sensor works fine and automatically adjusts the screen if you chose to enable that option.
CF-191DYC51M
Windows 10

User32
Posts: 287
Joined: Sat Jun 20, 2015 3:24 pm

Re: Windows 10 on CF-19 MK6

#2 Post by User32 »

I ran Win10 for a short while on my Mk6 and I HATED it. No alt-tab to desktop is super annoying.

That being said, I now run Win8.1 and i'm liking it so far.

User avatar
Rob
Toughbooktalk Founder
Posts: 3575
Joined: Mon Mar 16, 2009 8:23 pm
Contact:

Re: Windows 10 on CF-19 MK6

#3 Post by Rob »

Win 10 Pro running flawlessly on my MK7 DT CF-19 as we speak! :)
~Rob - Vice President - Rugged Depot~
~Cell: (630)/300-8877~
~Owner - Toughbooktalk~
~Fully rugged Toughbook user since April 18th 2005~
~FZ-40ACAAHKM - Primary Toughbook / Workstation as of 7/29/22
~Win10 Pro (Win11 DG), Intel Core i5-1145G7 (up to 4.4GHz), vPro, 14.0" FHD Gloved Multi Touch, 16GB, 1TB Samsung SSD, Intel Wi-Fi 6, Bluetooth, 4G EM7690, GPS, Quad Pass (BIOS Selectable), Mic and Infrared 5MP Webcam, Standard Battery, TPM 2.0, Emissive Backlit Keyboard, Dual Batteries, USB A + HDMI + Serial X-PAK, Shoulder Strap, Flat~
~AT&T Business 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Platinum Partner~

http://www.toughbooktalk.com
http://downloads.toughbooktalk.com/
http://www.rugged575.com - 300' UHF GMRS Radio Repeater
http://www.crete600.com - 310' UHF Linked GMRS Radio Repeater


~Emergency preparedness starts with reliable communication systems above all. Pretend the internet and cell phones didn’t exist, how will you communicate? If you’re interested in learning more, ask me!~

User32
Posts: 287
Joined: Sat Jun 20, 2015 3:24 pm

Re: Windows 10 on CF-19 MK6

#4 Post by User32 »

Rob wrote:Win 10 Pro running flawlessly on my MK7 DT CF-19 as we speak! :)
What exactly is so awesome about the Mk8 anyway? If I compare the CPUs on CPUBoss the 3340M in the Mk7 is faster than the Mk8's 3610ME?

Shackwrrr
Posts: 6
Joined: Fri Nov 04, 2016 10:31 am

Re: Windows 10 on CF-19 MK6

#5 Post by Shackwrrr »

User32 wrote:
Rob wrote:Win 10 Pro running flawlessly on my MK7 DT CF-19 as we speak! :)
What exactly is so awesome about the Mk8 anyway? If I compare the CPUs on CPUBoss the 3340M in the Mk7 is faster than the Mk8's 3610ME?
Just looks like panasonic is doing a little apple magic. It has a bigger number so its better. Well you get Directx 11 and ECC memory support if that's your thing.

The big limiting factor is the passive cooling of the chassis, with no design changes to the case a 35w TDP processor is all you're going to be able to use.
CF-191DYC51M
Windows 10

User32
Posts: 287
Joined: Sat Jun 20, 2015 3:24 pm

Re: Windows 10 on CF-19 MK6

#6 Post by User32 »

Shackwrrr wrote:
User32 wrote:
Rob wrote:Win 10 Pro running flawlessly on my MK7 DT CF-19 as we speak! :)
What exactly is so awesome about the Mk8 anyway? If I compare the CPUs on CPUBoss the 3340M in the Mk7 is faster than the Mk8's 3610ME?
Just looks like panasonic is doing a little apple magic. It has a bigger number so its better. Well you get Directx 11 and ECC memory support if that's your thing.

The big limiting factor is the passive cooling of the chassis, with no design changes to the case a 35w TDP processor is all you're going to be able to use.
The HD4000 GPU already supports DX11 so that only leaves ECC, which isn't that useful.

Weird move by the Japs in Kobe, though.
Last edited by User32 on Fri Apr 21, 2017 3:02 pm, edited 2 times in total.

User avatar
ares93
Posts: 50
Joined: Sun Apr 18, 2010 12:08 pm
Location: Södertälje (aka Little Baghdad), Sweden

Re: Windows 10 on CF-19 MK6

#7 Post by ares93 »

What drivers did you use? Currently attempting the Windows 8 drivers but they aren't very cooperative...
CF-29LTQGZBM, MK4, 1526mb, KingSpec 64GB SSD, DVD, GPS, Emissive, XP SP3

User32
Posts: 287
Joined: Sat Jun 20, 2015 3:24 pm

Re: Windows 10 on CF-19 MK6

#8 Post by User32 »

ares93 wrote:What drivers did you use? Currently attempting the Windows 8 drivers but they aren't very cooperative...
Make sure you run the driver installer as Admin, and get the Mk7 drivers too.

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: Windows 10 on CF-19 MK6

#9 Post by toughasnails »

Since you are running W10 you should run O&O SHUT 10. It Will disable all the spying cap that MS put in it . Check out post #25 here http://forum.notebookreview.com/threads ... 178/page-3

It's free https://www.oo-software.com/en/shutup10
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

User avatar
ares93
Posts: 50
Joined: Sun Apr 18, 2010 12:08 pm
Location: Södertälje (aka Little Baghdad), Sweden

Re: Windows 10 on CF-19 MK6

#10 Post by ares93 »

User32 wrote:
ares93 wrote:What drivers did you use? Currently attempting the Windows 8 drivers but they aren't very cooperative...
Make sure you run the driver installer as Admin, and get the Mk7 drivers too.
Really weird. All of the windows 8 MK6 drivers wont install, and give code 10 (cannot start) if i force them. But the MK7 Win 8.1 seems to work fine so far. Going through the driver bundle atm.

Power management is still iffy, touch+pen still wont accept Panasonic drivers. They work but cant be calibrated and work simultaneously. Man i'm too tire for this rubbish right now. The toughbook can sit in the corner and be ashamed, i just bought a new (used, but new to me) bike i have to play with.
CF-29LTQGZBM, MK4, 1526mb, KingSpec 64GB SSD, DVD, GPS, Emissive, XP SP3

Post Reply

Return to “CF-19 Talk (Discontinued Model)”