cf-19 mk 5 touch screen

Post all questions and information about the CF-19 in here.
Message
Author
sakkara
Posts: 38
Joined: Wed Apr 22, 2015 10:42 pm

cf-19 mk 5 touch screen

#1 Post by sakkara »

just bought a second hand unit and touch screen not working
how do i tell if it is hardware or software ?
if drivers are installed what will i see in control panel ?
running win 7 64 bit
thanks

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: cf-19 mk 5 touch screen

#2 Post by Shawn »

Full model number?
Is it touchscreen or digitizer?
Life will beat you into submission.

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: cf-19 mk 5 touch screen

#3 Post by toughasnails »

Welcome to Toughbooktalk. Please post you full model number, it will give us a better idea what you have for a 19. I have a 19 MK5 but I installed W7 32bit, 64bit on a 19 is what I call "over kill" . Did you use the recovery disk to install W7/drivers or just the standard disk and then added the drivers ?
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

sakkara
Posts: 38
Joined: Wed Apr 22, 2015 10:42 pm

Re: cf-19 mk 5 touch screen

#4 Post by sakkara »

cf-19 ADNC7DA

bought second hand with windows 7 64 bit per-installed
i have a windows 7 disk but not the original Panasonic one

have managed to get the stylus working BUT screen wont respond to finger touch !!
is this a dual touch model ? thanks

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: cf-19 mk 5 touch screen

#5 Post by Shawn »

Panasonic Toughbook CF-19ADNC7DA Mk5 Dual Active Screen Core i5-2520M 2.5 GHz, 10.1", 320GB HDD, 4GB RAM - 3G, GPS, Dual Passthrough Windows 7 Pro 32bit


Yes it is dual touch...The drivers are probably incorrect....
Since it is a CF19 and driver installation is extremely difficult to get correct, I recommend getting the official Win7 32bit recovery disk.
What country are you in?
Life will beat you into submission.

sakkara
Posts: 38
Joined: Wed Apr 22, 2015 10:42 pm

Re: cf-19 mk 5 touch screen

#6 Post by sakkara »

new zealand

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: cf-19 mk 5 touch screen

#7 Post by Shawn »

I would contact the authorized Toughbook dealer for New Zealand and get an official Win7 32bit restore disk..
It's the simplest solution....


Comworth are the proud New Zealand distributor for Toughbook working closely with Panasonic in the New Zealand market with service centres across the country.

We don't sell direct but are more than happy to advise you of your nearest stockist, or refer an enquiry on to your preferred IT Reseller

Please contact us and we can find the partner who will best meet your requirements:

TOLL FREE 0800 2 TOUGH (86844)

Auckland
8 Antares Place, Rosedale


Wellington
Grand Plimmer Tower


Christchurch
480B Moorhouse Avenue
Life will beat you into submission.

sakkara
Posts: 38
Joined: Wed Apr 22, 2015 10:42 pm

Re: cf-19 mk 5 touch screen

#8 Post by sakkara »

just flicked " Owner Rob" some paypal funds for a download so will post back when reloaded

another question
i have the option of a :
Seagate Momentus 750GB drive
or a 128GB ssd

will opt for the 750GB unless you think the performance boost of the ssd will outweigh the lower storage capacity ?

and comments thanks

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: cf-19 mk 5 touch screen

#9 Post by toughasnails »

Seagate Momentus 750GB drive or a 128GB ssd
All I have in mine is a 120GB SSD but I don't have a lot on it. If I was using it more I would of put a 240GB SSD in it. All my music and movies I keep on a external drive since they can fill up a drive fast.
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

sakkara
Posts: 38
Joined: Wed Apr 22, 2015 10:42 pm

Re: cf-19 mk 5 touch screen

#10 Post by sakkara »

it is also running 12GB ram
1x4GB
1x8GB

thought max was 8GB
:wtf:

Post Reply

Return to “CF-19 Talk (Discontinued Model)”