CF-19 MK5 Digitizer question...

Post all questions and information about the CF-19 in here.
Post Reply
Message
Author
RDJacob

CF-19 MK5 Digitizer question...

#1 Post by RDJacob »

Hey guys, so I'm trying to diagnose why this digitizer Isn't working on a CF-19ADUAX1M. I have re imaged it, installed the proper touch screen driver, and still nothing. I'm left to believe that it may be an issue in the digitizer panel itself, but I have no idea where it is located. I removed the LCD cabinet, but I can't discern it from any other piece. I'm familiar with previous marks having the big red sheet on the back, but apparently MK5 dual touches don't have those. If anyone could give me some hints or tips on how to locate it, I would be greatly appreciative.

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: CF-19 MK5 Digitizer question...

#2 Post by toughasnails »

Have you by any chance checked the BIOS to see if it's set right . Not really sure if there is any thing to set for the touch/digitizer in there since I don't have a MK5...just saying :confused:
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

RDJacob

Re: CF-19 MK5 Digitizer question...

#3 Post by RDJacob »

Yea man, I checked the BIOS. There's nothing regarding the touch screen besides if I want to change it from Tablet mode to Auto.

User avatar
mklym
Posts: 907
Joined: Fri Feb 22, 2013 3:10 pm
Location: Edmonton, Alberta

Re: CF-19 MK5 Digitizer question...

#4 Post by mklym »

Try setting the BIOS touchscreen settings to 'Auto'.

I have no MK5 to check. :(
CF-29LTQ,CF-31SBM,CF-52youngGUN,

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.

RDJacob

Re: CF-19 MK5 Digitizer question...

#5 Post by RDJacob »

It's default is "Auto", but I'll try changing it to Touch screen, booting, then changing it back to see if that make a difference.

User avatar
ADOR
Posts: 1990
Joined: Tue Dec 21, 2010 12:51 pm
Location: Northeast Louisiana

Re: CF-19 MK5 Digitizer question...

#6 Post by ADOR »

May have to try a "reset to defaults" to see if that will help, I know on a few wireless cards when you have problems with them you have to do that.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5

RDJacob

Re: CF-19 MK5 Digitizer question...

#7 Post by RDJacob »

So far nothing.

Does anyone have any idea where the digitizer is located in the panel so I can try to swap it out? I'm only familiar with the red sheet behind the LCD kind of digitizer, so I'm lost when it comes to finding a mk5 dual touch one.

User avatar
mklym
Posts: 907
Joined: Fri Feb 22, 2013 3:10 pm
Location: Edmonton, Alberta

Re: CF-19 MK5 Digitizer question...

#8 Post by mklym »

Talk to Teo, or Jeff. One of them might know. Anyone have a CF-19MK5 service manual? :)
CF-29LTQ,CF-31SBM,CF-52youngGUN,

Life's Journey is not to arrive safely at the grave in a well preserved body, but rather to skid in sideways totally worn-out shouting 'Woo Hoo! What a ride!

Motorsports - the only real sport. If it doesn't have a motor, it is just a game.

There is always something waiting at the end of the road, if you are not willing to see what it is, you probably shouldn't be out there in the first place.

User avatar
ADOR
Posts: 1990
Joined: Tue Dec 21, 2010 12:51 pm
Location: Northeast Louisiana

Re: CF-19 MK5 Digitizer question...

#9 Post by ADOR »

I have only had one 18 and one 19 digitizer apart, it's a green board behind the screen.
CF-28 MK2,Mk3 / CF-29 Mk3 / CF-30 MK2 / CF-25 Mk1 ATI / CF-19 MK3/Mk3/Mk5 / CF-U1 Mk1,Mk2 / CF-M34 Mk7/Mk3 / CF-17 Mk1 / CF-07
Voodoo Envy M355 / M360 / M515 / M780 / U703 / Voodoo Hexx / Voodoo Idol / Voodoo Rage F1 / Voodoo Rage F1 / Voodoo Rage F1 "signed case" / Voodoo Omen
Alienware M11x R1, Alienware 17 R5

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: CF-19 MK5 Digitizer question...

#10 Post by Shawn »

...........................................................................................................................................................................................................................................................................................................................................................................................................
Life will beat you into submission.

Post Reply

Return to “CF-19 Talk (Discontinued Model)”