~Toughbooktalk~ Rob - 630-300-8877

The largest Toughbook discussion site on the net!
It is currently Sat May 26, 2018 1:56 am

All times are UTC-06:00




Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
PostPosted: Wed Mar 25, 2009 9:57 pm 
Offline
Toughbooktalk Founder
User avatar

Joined: Mon Mar 16, 2009 8:23 pm
Posts: 3567
Cisco 678 settings:

COM1
38400 baud rate
8 data bits
Parity = none
Stop bits = 1
Flow control = none

VPI/VCI Settings = 0/35
Line mode = g.DMT

Configuring the Cisco 675 or 678 if you have a Single Dynamic IP
Follow these steps to configure the Cisco 675(678).
1. At the cbos> prompt, type enable and press enter. A password prompt appears.

2. At the password prompt, press enter. The cbos system prompt cbos# appears.

3. At the cbos# prompt, type set nvram erase and press enter. The command restores the modem to its factory settings.

4. At the cbos# prompt, type write and press enter to save your change.

5. At the cbos# prompt, type reboot and press enter to reboot the modem.

6. At the cbos> prompt, type enable and press enter. A password prompt appears.

7. At the password prompt, press enter. The cbos system prompt cbos# appears.

8. If and only if you have a Cisco 678 with a DMT-provisioned line (most recent installs are set up this way), you must do the following:
a. At the cbos# prompt, type: set interface wan0-0 disabled

b. At the cbos# prompt, type: set interface wan0-0 vpi 0

c. At the cbos# prompt, type: set interface wan0-0 vci 35

d. At the cbos# prompt, type: set interface wan0-0 enabled

9. At the cbos# prompt, type: set ppp wan0-0 ipcp 0.0.0.0

10. At the cbos# prompt, type: set ppp wan0-0 dns 0.0.0.0

11. At the cbos# prompt, type: set ppp wan0-0 login <user-id> where <user-id> is from the Account Information page that was faxed to you.

12. At the cbos# prompt, type: set ppp wan0-0 password <password> where <password> is from the Account Information page that was faxed to you.

13. At the cbos# prompt, type: set ppp restart enabled and press enter.

14. At the cbos# prompt, type: set dhcp server disabled and press enter.

15. At the cbos# prompt, type: set nat enabled and press enter.

16. At the cbos# prompt, type: set web port 8080 (or some other random number)

17. At the cbos# prompt, type: set web disabled

18. At the cbos# prompt, type: set broadcast forwarding disabled

19. At the cbos# prompt, type: set rip disabled

20. At the cbos# prompt, type: set snmp disabled

21. At the cbos# prompt, type: set tftp disabled

22. At the cbos# prompt, type: write and press enter.

23. At the cbos# prompt, type: reboot and press enter.

24. At the cbos> prompt, type: enable and press enter. A password prompt appears.

25. At the password prompt, press enter. The cbos system prompt cbos# appears.

26. At the cbos# prompt, type: show running and press enter. Verify that the following appears somewhere in it:
[[ DHCP = Section Start ]]
DHCP Server Pool DNS = 00, 65.193.16.1
DHCP Server Pool Secondary DNS = 00, 208.20.202.1






NAT Stuff:
Example:
cbos#set nat entry add 167.125.40.11 2300-2400 0.0.0.0 2300-2400 udp

cbos#set nat entry add 167.125.40.11 2300-2400 0.0.0.0 2300-2400 tcp

cbos#set nat entry add 167.125.40.11 80 0.0.0.0 80 udp

cbos#set nat entry add 167.125.40.11 80 0.0.0.0 80 tcp

remember to write settings after inputting them

_________________
~Rob - Rugged Depot ~ Cell: (630)/300-8877~

~Fully rugged Toughbook user since April 18th 2005~
~New 3/16/18 - CF-540001KM Win10, Intel Core i5 6300U 2.4GHz, 240GB SSD, 12GB, Verizon 4G LTE, Intel 8260 WiFi a/b/g/n/ac, Bluetooth~
~For the wife (New 1/25/18): CF-54F0962KM/i5/128GB SSD/8GB/Win 10~
~Others: CF-52MLBBQ2M (Home Workstation)
~New 11/13/14 Donations thanks to everyone at Toughbooktalk: IBM xSeries 3650/2 x Xeon X5560 2.8GHz/16GB RAM/8 x 600GB 10KRPM SAS RAID 5/3.71TB Space/Win 2008 R2/3000VA + 1250VA Battery Backup~
~AT&T 1GB Fiber 1GB/1GB business static line~
~Gamber & Johnson Diamond Partner~

http://www.toughbooktalk.com
http://www.toughbooktalk.com/public_downloads
http://www.toughwiki.com
http://www.robsnetworks.com
http://www.giganethosting.com


Top
   
 
Display posts from previous:  Sort by  
Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited