Batts CF-VZS351aw

Post all queries to buy sell or trade Toughbooks in here.
Message
Author
User avatar
Bill_TN
Posts: 531
Joined: Sat Mar 21, 2015 9:07 am
Location: Ft. Campbell area.

Batts CF-VZS351aw

#1 Post by Bill_TN »

Anyone need or want some CF-VZS351AW batteries? Just had a box of 9 get dropped into my lap. All seem to be essentially BNIB. Except for me opening them too look see. :sucks:
CF-29ET, CF-28ST, CF-30G , CF-M34, CF-19Ch, CF-19FH, CF-19CD, CF-73 mk1, CF-74K & H, CF-51RCB, CF-51RCL, CF-52CC .

As long as the deal is good for you it is good for me.

Member of Toughbooktalk and Notebook Review forums

User avatar
safn1949
Posts: 544
Joined: Wed Jan 15, 2014 10:33 am

Re: Batts CF-VZS351aw

#2 Post by safn1949 »

I'll take 2 of therm for my CF-71's
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.

User avatar
Bill_TN
Posts: 531
Joined: Sat Mar 21, 2015 9:07 am
Location: Ft. Campbell area.

Re: Batts CF-VZS351aw

#3 Post by Bill_TN »

Ok shouldn't be a problem. I'll just have to figure out which flat rate shipping box to use and figure out what they are worth. Guess the last parts pretty important huh?
http://www.atbatt.com/laptop-batteries/ ... -cf-71.asp
http://www.amazon.com/Panasonic-Toughbo ... B006NTXZJA
http://www.ebay.com/itm/NEW-PANASONIC-C ... 5655248432
Are these accurate prices? Shoot I'm gonna have to do an flea bay account thing and pay-pal I guess.
Man I need to get my crap straight. huh?
CF-29ET, CF-28ST, CF-30G , CF-M34, CF-19Ch, CF-19FH, CF-19CD, CF-73 mk1, CF-74K & H, CF-51RCB, CF-51RCL, CF-52CC .

As long as the deal is good for you it is good for me.

Member of Toughbooktalk and Notebook Review forums

User avatar
safn1949
Posts: 544
Joined: Wed Jan 15, 2014 10:33 am

Re: Batts CF-VZS351aw

#4 Post by safn1949 »

Didn't pay but $25-30 each for the laptops.
2 CF-30Mk3's, 2 CF-71's, CF-L1, 3 CF-72's, CF-73, CF-74, CF-48, CF-50, CF-51Mk3, 2 CF-19's,7 CF-52's, FZ-A1 and other assorted beaters.

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: Batts CF-VZS351aw

#5 Post by toughasnails »

Are these accurate prices?
Them prices are ridiculous...did you check out his other eBay auctions..$542.00 for a CF-29 :doh: . No one will pay them prices for a battery where the laptop is only worth $50.00 .
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

User avatar
Bill_TN
Posts: 531
Joined: Sat Mar 21, 2015 9:07 am
Location: Ft. Campbell area.

Re: Batts CF-VZS351aw

#6 Post by Bill_TN »

That's what I'm trying to figure out. I sure as hell don't want to screw a fellow forum member. That e-bay one is exactly the batts that I have here. See I'm not gonna BS anyone, I've got NOTHING in this stuff. It just ends up in my lap. So willing to share the wealth so to speak. I am looking for parts for my basket case cf-51. Needs Hdd carriers and batt bay cover. Finally found a core 2 duo processor that works for it. Plan to try this 5 that I have in this scrap dell next. Then there is the cf-28 that needs hdd carriers a batt and the cover for both. I pretty much have my 74's and 73's covered. I'm always looking for another toy. Drop me an IM with suggestions.
CF-29ET, CF-28ST, CF-30G , CF-M34, CF-19Ch, CF-19FH, CF-19CD, CF-73 mk1, CF-74K & H, CF-51RCB, CF-51RCL, CF-52CC .

As long as the deal is good for you it is good for me.

Member of Toughbooktalk and Notebook Review forums

User avatar
Bill_TN
Posts: 531
Joined: Sat Mar 21, 2015 9:07 am
Location: Ft. Campbell area.

Re: Batts CF-VZS351aw

#7 Post by Bill_TN »

So you all have no constructive words to help out huh? As much as I've been looking there does not seem to be an abundance of these batts out there. So figuring out what the heck they are worth is rather difficult. Hence the post with what I was able to find as reference, and a simple " is this accurate" question. Which gets basically a :wtf: reply. But not any type of constructive suggestions or advice.
Now there are 2 schools of thought on this type of matter. Few of this item = get highest $$. But that is not my way. Then there is the other, I have these items that I personally have NO USE for and am willing to share the wealth. I call it good karma.
See I am right next to FT. Campbell so get to come across all kinds of neat stuff like this. Since I am a member of this neat group and share the Tough Book affliction, I'll gladly share what I can. But need help sometimes. :cheers:
Last edited by Bill_TN on Wed Jun 03, 2015 7:55 pm, edited 1 time in total.
CF-29ET, CF-28ST, CF-30G , CF-M34, CF-19Ch, CF-19FH, CF-19CD, CF-73 mk1, CF-74K & H, CF-51RCB, CF-51RCL, CF-52CC .

As long as the deal is good for you it is good for me.

Member of Toughbooktalk and Notebook Review forums

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: Batts CF-VZS351aw

#8 Post by SHEEPMAN! »

How many CF-51 do you need?

I like the RCetc with 7600. (like RCLDFBM)
2 51A, one 51L (cracked lower case) then the R units....1 7200 2 are 7600. (I upgraded 'em)Keeping one.
I have a heavy box of CF-28 parts plus 3 complete units. All available....condition unknown but supposed to work. I'll boot them to bios but that's it as far as testing goes.

I'd ship the 28 parts as is for shipping cost. They were given to me. :help: I haven't opened the box.

How many 51 caddies do you need. Found a bunch the other day.

Bottom line is I don't want to spend a lot of time checking this stuff or digging for tiny parts. Also don't buy any CF-29 parts until you talk to me. I might sell them by the pound. :confused:

The forum has been quiet for a while. I think everyone is cleaning the yard.

:salute:
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

User avatar
Bill_TN
Posts: 531
Joined: Sat Mar 21, 2015 9:07 am
Location: Ft. Campbell area.

Re: Batts CF-VZS351aw

#9 Post by Bill_TN »

:pat: LOL. Took me a few min to edit my previous post and during that time some one posted a reply. TY. SADLMKR .
As for the 51 parts. I'll have to put this one back together and boot bios to get the full model info since all the info stickers are shot. Price on 2 51 caddies, as for the 28 parts all my old unit needs are a batt. a hdd caddy, and the bottom covers for those items. I even had another dvd unit for that one get dropped off for me today. Might need a back up power supply for that one later down the road. Have 1 now but a spare is always handy. I got a box of cf-74 compatible supplies and not 1 of the cf-28 style in the box.LOL.
Again SADLMKR, ty for the reply. Appreciate the acknowledgement. And maybe once the yards are mowed might get some more feed back. :cheers:

For the cf-51 there are 2 different numbers. CF51MK225H06136 is the number on the sticker under the ramm. CF-51ZFYZCZM is the one on metal plate. Any ideas there? Still plan to try the bios boot check.
CF-29ET, CF-28ST, CF-30G , CF-M34, CF-19Ch, CF-19FH, CF-19CD, CF-73 mk1, CF-74K & H, CF-51RCB, CF-51RCL, CF-52CC .

As long as the deal is good for you it is good for me.

Member of Toughbooktalk and Notebook Review forums

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: Batts CF-VZS351aw

#10 Post by SHEEPMAN! »

Did ya notice my sig?
Fair for you/ fair for me.
I can ship you four or five Computers with a bunch of throw-ins.

New pricing schedule: What are they worth to you?

It works like this:
1. You have a need.
2. You spend minutes/hours to find it.
3. You call/PM me and tell me what you need.
4. I send it, you pay what it is worth to you. <<<<<<<<<<<<<<<<<<<<<<<<<<<<

I refuse to price stuff. Mainly because I price it fairly and the customer wants to "talk me down". Which pisses me off. See the "fair" part.

Before the carpal tunnel kicked in I had three vendors that worked old school. IOW I called the stirrup gal, she built the Custom stirrups and sent them to me....with an invoice. I paid the invoice. Easy.

That's my pricing. I could go on and on.

So, what are nib cf-51 caddies going for today? How many do you want?

You do the work. I charge $50.00/hour minimum shop time.

This is addressed to everybody...I'm not picking on you. :D
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

Post Reply

Return to “Buy/Sell/Trade Trade Forum”