Page 5 of 7
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 1:08 pm
by SHEEPMAN!
Teo, I have the screen if you will confirm the number. Ends in POO.
All I know is it has plugs for double inverter. (four wires, two plugs)
Have you thought about using a CF-29 lcd...with your light conversion. Of course you would need all the other stuff too. I'll find the TSPCB in a day or two.
Jeff
Check PM
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 1:26 pm
by Shawn
Jeff,
Watch where you're stepping.... ends in POO..
yuck,yuck,yuck
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 4:01 pm
by teo
Sadlmkr wrote:Teo, I have the screen if you will confirm the number. Ends in POO.
All I know is it has plugs for double inverter. (four wires, two plugs)
Have you thought about using a CF-29 lcd...with your light conversion. Of course you would need all the other stuff too. I'll find the TSPCB in a day or two.
Jeff
Check PM
Yes! that's it! but there are two types of P00. One with the matt finish and the other one is Glossy. I need the matt finish. The Glossy one is for MK3 and If installed the glossy to the MK1 or MK2. There is rainbow effect when you look at it directly and vice versa for the other.
Another model is P01 is a single backlight and also there are two type same as mentioned above.
Regarding the CF-29LCD. I don't have anymore spare LCD for CF-29. What I've got are mostly has a burn mark on it.
teo
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 5:41 pm
by SHEEPMAN!
I'm pretty sure this is matt. Do you want the rest of the CF-30 too? Has bluetooth, 3945...bad mobo...
No inverter, I need the one I have. I'll put a packet together.
Cut wood today, ranch work taking priority right now.
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 5:45 pm
by SHEEPMAN!
Shawn,
I expected that. Now I find there are two types of poo to add to the sheep and horse poo. And chicken, deer, bunnies... poo EVERYWHERE!
Teo,
I will get the full model number tonight.
Jeff...sorry 'bout the double post.
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 6:10 pm
by Shawn
I have CF73 sitting here doing nothing. Would the LCD in it work for someone? I know I have at least one CF74 LCD. Just not sure the condition. Someone need a care package? I'm tired of looking at them.
Re: CF-52GUN touchscreen model
Posted: Thu Jan 02, 2014 10:45 pm
by teo
Shawn wrote:I have CF73 sitting here doing nothing. Would the LCD in it work for someone? I know I have at least one CF74 LCD. Just not sure the condition. Someone need a care package? I'm tired of looking at them.
Shawn! The lcd of the 73,74,29 are all compatible even to CF-30 but for non ts CF-30 only coz they use only one backlight.
teo
Re: CF-52GUN touchscreen model
Posted: Tue Jan 07, 2014 1:28 pm
by teo
OK! I ended up back to the 13" TS panel courtesy by Morgan,
. It has a dead backlight and when I open it for inspection, I confirmed the CCFL tube gave up/dead. I replaced ccfl tube with my extra two LED strips kit and its great. "Awesome".
See picture.
teo
Re: CF-52GUN touchscreen model
Posted: Tue Jan 07, 2014 3:09 pm
by Rob
Nice Wiha screwdrivers!
Re: CF-52GUN touchscreen model
Posted: Tue Jan 07, 2014 9:09 pm
by Springfield
teo, that's the most clean picture of your workbench yet!
Got 2 LED strips in from China last week. I was planning to put them into a 52GUN with dim screen. Glad you did it first, now I can ask the expert if it gets too hard for me LOL. Any tips before I get started?