How to BIOS update for CF-52 MKIII with a different version

Post all questions and information about the CF-5x series in here.
Message
Author
onirakkiss
Posts: 71
Joined: Sat Feb 11, 2012 6:33 pm

How to BIOS update for CF-52 MKIII with a different version

#1 Post by onirakkiss »

First: It worked for me, but this does not include it will working for u! Makes sense? :)

I bought an CF-52PFN32PE in the bay. The seller wrote, there is a password from his girlfriend on the machine, but that was a lie. :blowaway: If I started the machine, there was a splash screen "Openreach BT Group". I had no access into the BIOS and also no access to the harddisk, even if I put them on an other machine. I found out, the hdd has an strong ATA password.
I asked BT-Group about the machine-ID, I got no answer. I asked toughbook.eu, they told me, it will cost about 1300,-€ to install a new motherboard....
Nevermind, to get access into the BIOS I downloaded the BIOS for the CF52 MK3 on the canadian Panasonic site https://panasonic.ca/PCS/Firmware/CF52P ... Binary.zip .
I've made an bootable 4GB USB-stick with DOS and the decompressed BIOS files. It does not start from the stick. Also the laptop want boot on CD except u pull the harddisk out of the bay. So I tried to create an bootable DOS CD with the BIOS on the same disk, but It does not work, because the BIOS file is 8MB and the biggest DOS Image is 2.88MB. So I installed Windows 7 32bit on a harddisk of an other well working Laptop and inserted this prepared HDD into the Panasonic laptop. Now it was possible to press F12 while booting and I got the DOS-prompt from my USB-stick.
The standard routine is to start the BIOSUP.BAT. But I got the error message, that the BIOS would not fit to the machine. I had nothing to loose, cause I found an better mainboard on ebay, which I would buy, if the BIOS would fail.
I typed:

bu52m3.exe v300L14.523 -im

into the console and voilà; BIOS flashed, password was gone :) :headbang:
So '-im' is the flag, which will not use any checks, if the BIOS is the correct version, right?
BTW with 'KillCMOS' u can set the working hours to zero...but this does not make any sense for me...


And here are the flags for the bios flash tool from panasonic. I explored them by using IDA freeware version. This will probably help u, if u are trying an different BIOS to enable WIFI or something else ;-)

-rchk
-mlist
-f0
-d help :)
-f
-r
-cboot
-a
-m
-x
-partial
-sn SerialNumberFile
-cn ModelNumberFile
-wwanid WWANidFile
-kbid KeyboardIdFile
-st OEMstringFile
-wt OwnershipTagFile
-sum= file
-wbd file
-rbd boardRevisionData
-wdd writeDeviceData
-rdd readDeviceData
-whole BiosFile
-wpc WorkingTimeStartedCounterFile
-rpc recordTimePowerOnCountFile
+bb
-bb
-sec file
-sc3 file
-gen file
-issec MEI Standard Security PC
-im +++++++++ NO TESTS ++++++ be careful!!!
-entire
-savegbe
-savemac
-savepdr
-entiresave
+nvram
-nvram
-savesetup
-cfd ConfigurationFile
-abt CPT Attribute
-aba CPT Attribute
-abp CPT Attribute


If it worked for u, or not, tell me about.
CF-29NTQGZBM: 450nit Backlight-LED-XGA-Display; 1.5GB; 250GB 7200HDD; rubber backlight keyboard; 2nd Accu; ext.Charger; ABGN-PCI300Mb(Atheros); DVD-+LightscribeDL; Microfon; GPS; BT; 2MP-Webcam; 3.Wifi(n-draft)antenna; HSDPA
CF-52SLGDB1M: 700nit Backlight-LED-WUXGA-Display; 16GB; Crucial512SSD4m@6Gbps+BIOS Mod; emissive backlight keyboard

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: How to BIOS update for CF-52 MKIII with a different vers

#2 Post by SHEEPMAN! »

Ok the GUN (MK2?) wouldn't take it .....YET. Mine boots from CD but not USB. Messed around all day and finally loaded DOS from unetbootin. Very small very quick. I loaded it along the side of the bios upgrade on the USB then used ploplinux on cd as a bootmanager to get it going. I was trying to avoid that but it seemed the only way to get USB reading.
Now that I have both files on USB I will transfer back to a cd...to eliminate any question of Plop interfering. I don't think it is.
I could not get several DOS programs to "see" the usb. This unit has issues and that is apparently one of them. Nothing broken so far so the adventure continues. :D Thanks.
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

onirakkiss
Posts: 71
Joined: Sat Feb 11, 2012 6:33 pm

Re: How to BIOS update for CF-52 MKIII with a different vers

#3 Post by onirakkiss »

Hm, as I wrote above, I had the same problems. The final solution was to insert an HDD with a working Win7 32bit and the bootable (<4GB) USB-stick with DOS and the BIOS on the stick. Now I had started the engine and repeatedly hit F12. The DOS-prompt from the USB-stick appears :-) . It worked not everytime, but it worked.
CF-29NTQGZBM: 450nit Backlight-LED-XGA-Display; 1.5GB; 250GB 7200HDD; rubber backlight keyboard; 2nd Accu; ext.Charger; ABGN-PCI300Mb(Atheros); DVD-+LightscribeDL; Microfon; GPS; BT; 2MP-Webcam; 3.Wifi(n-draft)antenna; HSDPA
CF-52SLGDB1M: 700nit Backlight-LED-WUXGA-Display; 16GB; Crucial512SSD4m@6Gbps+BIOS Mod; emissive backlight keyboard

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: How to BIOS update for CF-52 MKIII with a different vers

#4 Post by SHEEPMAN! »

I get no reaction at all from [F12]. That is why I used the other method.
I keep getting the "you can't do that" message. :)
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

onirakkiss
Posts: 71
Joined: Sat Feb 11, 2012 6:33 pm

Re: How to BIOS update for CF-52 MKIII with a different vers

#5 Post by onirakkiss »

had u tried to boot from the stick in an other computer? only to verify the stick is bootable working...
CF-29NTQGZBM: 450nit Backlight-LED-XGA-Display; 1.5GB; 250GB 7200HDD; rubber backlight keyboard; 2nd Accu; ext.Charger; ABGN-PCI300Mb(Atheros); DVD-+LightscribeDL; Microfon; GPS; BT; 2MP-Webcam; 3.Wifi(n-draft)antenna; HSDPA
CF-52SLGDB1M: 700nit Backlight-LED-WUXGA-Display; 16GB; Crucial512SSD4m@6Gbps+BIOS Mod; emissive backlight keyboard

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: How to BIOS update for CF-52 MKIII with a different vers

#6 Post by SHEEPMAN! »

Nope. Duh :confused: on my part. Maybe we should get Rob to combine the two threads.:D
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

MrRe
Posts: 1
Joined: Fri Oct 14, 2011 10:47 am

Re: How to BIOS update for CF-52 MKIII with a different vers

#7 Post by MrRe »

Hi!
First of all, thanks for telling how you managed this. There might be some clues in what you have done to help others.
I am wondering whether a similar approarch would work on a CF-51 with similar problems. I can only boot from the HD as far as I can tell. So, as your knowledge far exceeds mine, can you determine what is the critical procedure.
Would any OS, XP for example, be used, or does it has to be W7?
What is the significance of the F12 key?
I appreciate that these things are trial and error but the more informed I am the better!
Thanks!

Robin.

User avatar
toughasnails
Toughbooktalk Moderator
Posts: 2644
Joined: Sat Mar 28, 2009 7:59 pm
Location: "TOUGHBOOK LAND" ME ,USA / NB . CANADA

Re: How to BIOS update for CF-52 MKIII with a different vers

#8 Post by toughasnails »

Sadlmkr wrote:Nope. Duh :confused: on my part. Maybe we should get Rob to combine the two threads.:D
If you want me to move them let me know :D
:spinny: Blair :spinny:
___________________
CF-19 MK1, 2, 5 Emissive Keyboard, Samsung 240GB SSD, 12GB Ram, W7 64 bit, GPS *
CF-28 MK2, 3
CF-30 MK2 , Intel SSD, 4GB , GPS, W7 Ultimate , Bluetooth, Emissive Keyboard
CF-51 MK3LL Core 2 Duo T7600 Mod , W7, 4GB Ram, 160GB 7200RPM HDD, Finger Print Reader
CF-52MK1 Core2Duo 2GHz, Intel SSD X25 Series ,4GB , BT with dock
CF-52 MK4 i5‑2540M 2.60GHz, ATI Discrete Graphics, Intel 120GB SSD, 16GB,W7 Pro 64bit
CF-53MK1 i5/2520, Kingston Hyper X SSD 240GB, 16GB memory, W7 Pro 64bit with dock
CF-54 MK2 Samsung SSD512GB, 16GB memory
And the little guys CF-M34 MK3 and MK7
Infologix / MediSlate 10.4" tablet
Cel Samsung Note 8
Member of:
http://thessdreview.com/
http://www.toughbooktalk.com

User avatar
SHEEPMAN!
Posts: 2239
Joined: Thu Oct 14, 2010 1:13 pm
Location: TDR-HQ California

Re: How to BIOS update for CF-52 MKIII with a different vers

#9 Post by SHEEPMAN! »

Naw. That's O.K. It makes the forum look busy. :D lol

Thanks,

Jeff
Fair for you/ Fair for me.
I chose to NOT be organized.

-------------------------------------------------------------------[/color]
http://toughbooktalk.com/
http://forum.notebookreview.com/panasonic/

User avatar
Shawn
Posts: 2960
Joined: Fri Jan 18, 2013 11:35 am

Re: How to BIOS update for CF-52 MKIII with a different vers

#10 Post by Shawn »

Has anyone ever duplicated this?
On another mark?
Life will beat you into submission.

Post Reply

Return to “CF-54 / CF-53 / CF-52 / CF-51 / CF-50 Talk (Discontinued Models)”